Bomba sumergible Renkforce 1519501 — 6500 l/h, 30 m de altura de elevación máx.

The Renkforce 1519501 submersible pump delivers up to 6500 l/h with a maximum head of 30 m, designed for submerged operation to transfer water efficiently. Compact and intended for tasks such as garden irrigation, pond drainage and general water transport, the pump is built to move large volumes while installed underwater. Its design focuses on continuous water transfer where a high flow rate and significant discharge height are required.

Advantages

The pump combines a high maximum flow with a 30 m head to handle deep suction and elevated discharge. Its submersible configuration reduces priming needs and allows quiet operation while immersed. The relatively compact housing simplifies placement in wells, sumps or ponds and enables rapid setup for seasonal or emergency use. Materials and construction provide straightforward maintenance and reliable hydraulic performance for general-purpose water handling.

Suitable for

• Garden irrigation and sprinkler supply
• Pond, fountain and pool drainage or filling
• Basement, cellar or construction site water removal
• Water transfer between tanks, cisterns and open reservoirs
• Temporary or seasonal dewatering tasks

Key specifications

• Maximum flow rate: 6500 liters per hour
• Maximum head (vertical lift): 30 meters
• Submersible design for underwater operation
• Suitable for handling clear water and typical garden/household water
• Compact housing for installation in wells, sumps or ponds

How to use

Place the pump fully submerged in the water source on a stable surface and ensure the discharge hose or pipe is securely connected to the outlet. Verify power supply compatibility and connect the pump according to the manufacturer's wiring instructions. Start the pump and monitor flow and discharge to confirm proper operation; adjust hose routing and valve settings to achieve the required discharge location. For extended use, periodically inspect the intake and impeller area for debris and ensure cooling water is available to prevent overheating.

Recommendations

Operate the pump in clean or lightly contaminated water; avoid running dry. Use appropriate filters or strainers if debris is expected. Observe maximum head and flow parameters when selecting hoses and fittings, and follow local electrical safety requirements when connecting the pump to mains power.