Cable de alimentación Omnitronic C17 a cable IEC en ángulo 1,5 m, 2×0,75 mm²

Omnitronic power cable with an angled IEC C17 connector and standard mains plug, 1.5 m long, with conductor size 2×0.75 mm². The cable is intended for connecting audio, AV and IT devices equipped with a C17 inlet. Its angled IEC connector reduces strain and improves accessibility in tight or crowded installations while providing stable mains power for studio, stage or home equipment.

Advantages

The angled IEC C17 connector allows for low-profile connection behind equipment placed close to walls or other devices, minimizing cable bending and contact stress. The 1.5 m length gives flexibility for placement without excess slack. Conductors sized at 2×0.75 mm² ensure reliable power delivery for compatible low- to moderate-power devices. The cable construction is designed for everyday use in audio, AV and IT contexts, combining practical handling with dependable electrical contact.

Suitable for

Key specifications

How to use

Inspect the cable and connectors for visible damage before use. Insert the angled IEC C17 connector firmly into the device's C17 inlet, ensuring correct orientation and a snug fit. Plug the mains end into a properly grounded wall outlet or power distribution unit. Route the cable to avoid sharp bends and pinching; leave enough slack to prevent stress at the connector. Unplug by gripping the connector bodies rather than pulling the cable itself.

Recommendations

Use this cable with equipment specified for C17 connections and within the electrical ratings of the connected device. Avoid running the cable near sources of heat or in areas where it may be crushed. Regularly check connections for corrosion or wear and replace the cable if the insulation or connectors become damaged.