Cable de fibra óptica BlueOptics OCTCABLE10M-SR 10 m OM3 MPO a 4×LC aguamarina

BlueOptics OCTCABLE10M-SR is a 10 metre multimode fibre optic breakout cable with OM3 fibre and a 125 µm core diameter. One end is fitted with a multi-fibre MPO connector and the other end breaks out to four LC connectors in aqua colour. The cable is intended for short-range, high-speed interconnections such as InfiniBand, 40/100 Gigabit Ethernet trunks and cross-connections in data centre equipment and network racks.

Advantages

The OM3 multimode construction supports laser-optimised transmission for higher bandwidth over short distances and reduces modal dispersion compared with older multimode grades. The MPO-to-4×LC breakout design provides a compact, space-saving solution for parallel optics links while enabling direct connection to LC-based transceivers and patch panels. The aqua jacket and LC ferrules match standard colour coding for OM3 systems, simplifying identification and installation.

Suitable for

• Short-reach data centre links and top-of-rack connections
• Parallel optics applications such as InfiniBand and 40/100 GbE
• Patch panels and optical distribution frames requiring MPO-to-LC breakouts
• Upgrades from legacy multimode links to OM3 infrastructure

Key specifications

• Cable length: 10 m
• Fibre type: OM3 multimode
• Core diameter: 125 µm
• Connector A: MPO multi-fibre connector
• Connector B: 4 × LC connectors (aqua)
• Colour: Aqua jacket and LC housings
• Application: Short-range, high-speed parallel optics

How to use

Route the cable through cable management channels or trays to avoid sharp bends and mechanical stress. Connect the MPO end to compatible MPO-style transceivers or cassette modules, and plug each LC connector into the corresponding LC ports on transceivers, patch panels or switches. Verify polarity and fibre mapping before powering equipment; use visual inspection or an adapter to confirm connector cleanliness and correct alignment. For best performance, maintain bend radius and avoid kinks during installation.

Recommendations

Clean connectors before mating and use dust caps when idle. Follow manufacturer guidelines for minimum bend radius and tensile limits. Use MPO-to-LC cassettes or shrouds in high-density panels to simplify management and preserve connector integrity.