Cable HDMI DELOCK 8K 60Hz 48 Gbit/s coaxial High Speed con funda trenzada, 2 m, HDMI Type-A a A, negro

The DELOCK High Speed HDMI cable is a 2 m coaxial cable with HDMI Type A male connectors on both ends and gold-plated contacts. Designed for high-bandwidth video and audio transmission, it supports up to 48 Gbps data rate and can carry 8K Ultra HD signals at 7680 × 4320 @ 60 Hz. The cable has a braided outer jacket, triple shielding and a 30 AWG conductor for stable signal transfer between TVs, monitors, Blu-ray players, consoles and AV receivers.

Advantages

This HDMI cable delivers a maximum bandwidth of 48 Gbps, enabling playback of 8K resolution at 60 Hz and high refresh rates at lower resolutions. It supports Dynamic HDR and Dolby Vision for improved colour depth and contrast, and eARC for lossless multichannel audio transmission to compatible sound systems. The braided jacket, triple shielding and gold-plated contacts improve durability and reduce interference.

Suitable for

• Connecting 8K or 4K TVs to media players, Blu-ray players or streaming devices
• Linking gaming consoles and gaming PCs to high-refresh-rate monitors or TVs
• Connecting AV receivers or soundbars using eARC for high-quality audio return
• Use with projectors, monitors and other HDMI-equipped displays

When it may not be suitable

This cable requires HDMI equipment that supports the higher bandwidth features (for example, 8K at 60 Hz, Dynamic HDR, Dolby Vision, eARC). If connected devices do not support these standards, maximum capabilities such as 8K resolution or eARC audio may not be available. Extremely long cable runs beyond the specified 2 m length may lead to signal degradation; use an appropriately rated longer cable or an active HDMI solution for longer distances.

Key specifications

• Cable length: 2 m
• Data transfer rate: up to 48 Gbps
• Maximum resolution: up to 7680 × 4320 @ 60 Hz
• Also supports: 5120 × 2880 @ 120 Hz; 3840 × 2160 @ 240 Hz (depending on system hardware)
• Cable type: coaxial, 30 AWG
• Cable diameter: approx. 4.8 mm
• Shielding: triple shielded
• Outer coating: braided jacket
• Connector type: HDMI Type A (Standard) male to male
• Contacts: gold-plated
• Audio features: eARC support, up to 32 audio channels, up to 1536 kHz sampling rate, Dolby TrueHD and DTS-HD Master Audio support
• Supports: Dynamic HDR, Dolby Vision, DSC 1.2, 4:4:4/4:2:2/4:2:0 color sampling, Game Mode VRR, CEC 2.0
• Colour: Black

How to use

Plug one HDMI Type A connector into the HDMI output of the source device (for example a Blu-ray player, console or PC) and the other connector into the HDMI input on the display or AV receiver. Ensure both devices are powered on and set to the correct HDMI input. To use eARC features, connect the cable between the TV’s eARC-enabled HDMI port and the eARC input on the sound system and enable eARC in both devices’ audio settings if necessary. Check display and device settings to select desired resolution and HDR options.

What to consider before purchase

• Verify that your source and display devices support the target resolutions and features (8K @ 60 Hz, Dynamic HDR, Dolby Vision, eARC).
• Confirm that a 2 m cable length is suitable for your installation; longer runs may require active cables or signal extenders.
• Ensure your devices’ HDMI ports are Type A (standard) and compatible with high-speed HDMI features.

Recommendations

For best results, connect the cable directly between devices without passing through multiple splitters or adapters. When using high-resolution or high-frame-rate modes, set the source and display to matching resolution and refresh rate, and enable HDR and eARC in device menus if supported.