Caja de PC MODECOM AMIRANI ARGB Midi Tower blanca — ATX/ITX, GPU 35 cm, disipador de CPU 16,5 cm, 2 ventiladores de 200 mm

MODECOM VOLCANO AMIRANI ARGB is a mid-tower PC case in white that combines a mesh-front design, tempered glass side panel and flexible component layout. It ships with three ARGB fans (2 x 200 mm front intake and 1 x 120 mm rear exhaust), magnetic dust filters on front and top panels, and offers multiple mounting options for additional fans and radiators to support air and liquid cooling configurations.

Advantages

The case provides extensive airflow thanks to a full-mesh front panel with side mesh inserts, bottom PSU intake with filter, and preinstalled large-diameter front fans. It includes an ARGB controller and remote control while also supporting motherboard ARGB headers. Storage flexibility is achieved with brackets for up to 2 x 3.5" HDDs under the PSU cover and multiple 2.5" mounting locations. Cable management features rubber grommets, velcro ties and a spacious routing area. Expansion slot covers are ventilated and removable with screws.

Suitable for

• Building a high-airflow mid-tower gaming PC
• Systems requiring ARGB lighting and fan control
• Compact ATX, Micro ATX or ITX builds with multiple storage drives
• Custom liquid cooling with front/top/bottom radiator support

Key specifications

• Form factor: Midi Tower
• Preinstalled fans: 2 x 200 mm (front), 1 x 120 mm (rear) — ARGB
• Fan support: front up to 2 x 200 mm / 2 x 140 mm / 3 x 120 mm; top 2 x 140 mm or 2 x 120 mm; PSU cover 2 x 120 mm
• Radiator support: front 240/280/360 mm, top 240/280 mm, rear 120 mm
• Storage: up to 2 x 3.5" HDD (under PSU cover) and multiple 2.5" mounts (rear of motherboard tray and on PSU cover)
• I/O ports: 2 x USB 3.0 (Type-A), 1 x USB Type-C, audio ports, power and LED control buttons
• ARGB controller: supports up to 6 fans with 3-pin 5V ARGB + 3-pin fan connectors
• Supported motherboards: ATX, Micro ATX, ITX
• Dimensions (W x D x H): 215 x 455 x 475 mm
• Weight: 8.23 kg
• Colour: White

How to use

Install the motherboard and route cables through the rubber-grommeted openings to the rear cable-management area, using the included velcro ties to secure wiring. Mount storage drives on the provided brackets under the PSU cover or on the rear 2.5" bracket. For GPU installation you can use the supplied vertical GPU bracket in place of standard expansion slots; ensure adequate clearance from the tempered glass side panel. Connect ARGB and fan power to the included ARGB controller or to motherboard ARGB/fan headers; use the remote control or front-panel buttons to set lighting and fan modes.

Recommendations

For optimal cooling and dust control, use the magnetic dust filters on the front and top panels and regularly clean the bottom PSU filter. When fitting large GPUs or installing radiators, verify clearance measurements against component dimensions and consider using the 140/120 mm fan configurations if space or radiator mounting requires it.