Cámara de inspección industrial Bosch GIC 120 Professional 8,5 mm

The Bosch GIC 120 Professional industrial inspection camera is designed for visual inspection in confined and hard-to-reach areas. It features a 6.86 cm (2.7") colour display with a resolution of 320 x 240 pixels and an 8.5 mm diameter probe that reaches up to 120 cm. The unit operates on 6 V power and delivers up to 5 hours of battery runtime, enabling extended on-site inspections without frequent recharging. The compact probe and clear screen provide operators with a practical tool for visual diagnostics and routine checks in industrial environments.

Advantages

The small-diameter probe and 120 cm length allow access behind panels, inside ducts, engines and machines where direct sight is impossible. The 320 x 240 pixel display presents a clear real-time image for quick assessment, and the battery runtime of up to 5 hours supports prolonged inspection tasks. The device’s straightforward controls and durable construction are suited to repeated use on job sites and in maintenance workflows.

Suitable for

• Inspecting inside pipes, ducts and ventilation channels
• Engine, gearbox and machinery internal visual checks
• Quality control and troubleshooting in production lines
• Maintenance inspections in confined industrial spaces

Key specifications

• Display size: 6.86 cm (2.7 inches)
• Display resolution: 320 x 240 pixels
• Probe diameter: 8.5 mm
• Probe length: 120 cm
• Power supply voltage: 6 V
• Battery runtime: up to 5 hours

How to use

Switch on the inspection camera and adjust the lighting or angle on the probe as needed to obtain a clear image on the display. Gently guide the 8.5 mm probe into the inspection area, using steady movements to avoid damage to the probe or the inspected object. Monitor the live image on the 6.86 cm screen and reposition the probe to examine different sections. After inspection, switch the device off and store the probe carefully to prevent kinks or abrasions.

Recommendations

For best results, clean the probe tip before and after use and avoid forcing the probe into obstructed passages. Use consistent, controlled movements when navigating tight spaces, and allow periodic breaks during long inspections to check battery status and device temperature. Store the camera in a protective case to extend service life.