Dashcam para coche Xblitz GO3 Full HD 2K (2560x1440) 140° IMX335, 60 fps, GPS, pantalla de 2 pulgadas, modo aparcamiento, MicroSD hasta 128 GB

Xblitz GO3 is a single‑camera car dash cam offering 2K Ultra HD (2560×1440) resolution with an IMX335 image sensor and a 140° wide viewing angle. The device supports up to 60 fps recording, Wide Dynamic Range (WDR) and night mode. It includes built‑in GPS, a 2" display, microphone and speaker, and stores footage on a MicroSD card up to 128 GB. The design is compact and black; the device should not be exposed to direct moisture.

Advantages

The dash cam provides high-resolution 2K recording for clearer details, a wide 140° field of view to capture more of the road, and a high frame rate of up to 60 fps for smoother motion. IMX335 sensor with WDR and night mode improves image quality in low light and high-contrast scenes. Built-in GPS logs location and speed, while parking mode and motion detection enable automatic recording when the vehicle is stationary. A 2" built-in display and integrated microphone and speaker allow quick playback and voice recording without external devices.

Suitable for

• Everyday driving to capture incidents and traffic events
• Night or low-light driving where enhanced sensitivity is required
• Recording while parked using parking mode and motion detection
• Logging routes and speed with built-in GPS

Key specifications

• Camera resolution: 2560 x 1440 pixels (2K Ultra HD)
• Image sensor: IMX335
• Viewing angle: 140°
• Maximum frame rate: 60 fps
• Video format: MP4
• Recording features: automatic recording, loop recording, motion detection, parking mode, auto power off
• Low-light features: night mode, Wide Dynamic Range (WDR)
• Display: 2" (5.08 cm) built-in display
• Audio: built-in microphone and speaker
• Storage: MicroSD (TransFlash) compatible, up to 128 GB
• Power: condenser-type power source, operating voltage 5 V
• Physical dimensions: width 53 mm, height 87 mm; weight 75.8 g
• Color: black
• GPS: built-in satellite GPS

How to use

Install a compatible MicroSD card (up to 128 GB) before first use. Mount the dash cam on the windshield in a position that provides an unobstructed 140° view of the road and connect the device to a 5 V power source. Power on the device and check the 2" display to set date/time and GPS settings. The camera starts automatic and loop recording when the vehicle is powered; enable parking mode and motion detection in settings if needed. Use the built‑in display or transfer MP4 files from the MicroSD card to a computer for playback and long‑term storage.

Recommendations

Do not expose the device to direct moisture. For reliable operation, use high-quality Class 10 or UHS‑I MicroSD cards and install the dash cam so it does not obstruct the driver’s view. Periodically format the memory card in the camera and back up important recordings.