Hoja de sierra de calar Bosch T 308 BF bimetal 2 uds. grosor de corte 5 cm

The Bosch T 308 BF Bimetal jigsaw blade (2 pcs) is designed for precise and durable cutting of abrasive wood, hardwood, laminated panels and plasterboard. Constructed from bimetal, the blade combines flexibility and wear resistance to maintain cutting performance over extended use. With a tooth pitch of 2 mm and an overall length of 117 mm, the blade supports a maximum cutting thickness of up to 50 mm, making it suitable for a variety of standard jigsaw tasks.

Advantages

The bimetal construction provides an optimized balance between toughness and edge retention, reducing the risk of tooth breakage during demanding cuts. A fine 2 mm tooth spacing ensures smoother cuts in wood-based materials and laminated surfaces while limiting splintering on the top layer. The blades come in a two-piece pack, allowing quick replacement on-site to minimize downtime. Compatibility with common T-shank jigsaw models offers straightforward fitting and stable cutting performance.

Suitable for

• Cutting abrasive and soft woods, including hardwood
• Trimming laminated panels and furniture boards
• Cutting plasterboard and gypsum-based panels
• Tasks requiring a maximum cutting depth up to 50 mm

Key specifications

• Material: bimetal construction for wear resistance and flexibility
• Tooth spacing: 2 mm for fine, controlled cutting
• Overall length: 117 mm
• Maximum cutting thickness: up to 50 mm
• Package quantity: 2 blades
• Shank type: T-shank compatible

How to use

Install the blade into a compatible T-shank jigsaw following the jigsaw manufacturer's blade-change procedure, ensuring the teeth face the correct cutting direction. Secure the blade in the clamp and check for firm attachment before starting the tool. Set an appropriate cutting speed and guide the jigsaw steadily along the marked line, allowing the blade to work without excessive force. For laminated panels, support the workpiece near the cut to reduce vibration and chipping.

Recommendations

Use appropriate personal protective equipment such as safety glasses and hearing protection. For best results on laminated or veneered surfaces, place masking tape along the cut line or cut with the finished side down to minimize splintering. Replace the blade when cutting performance decreases or if teeth become visibly worn or damaged.