Hojas de sierra de calar KWB 610230 — acero al carbono HCS, 9,1 cm de longitud, 3 mm de paso de diente, 2 uds.

Jigsaw blades KWB 610230 are made from HCS high carbon steel and supplied as a pack of two. Each blade measures 91 mm in length with a 3 mm tooth pitch, hardened with milled teeth and a side set to provide reliable cutting performance in softwood, chipboard, fibreboard and joinery applications up to approximately 50 mm material thickness.

Advantages

These HCS blades combine hardened cutting edges and milled teeth for consistent performance when cutting wood-based materials. The side set improves chip removal and reduces binding, while the 3 mm tooth spacing balances cutting speed and finish. Supplied in a two-piece pack, they are suitable for routine renovation, furniture and carpentry work.

Suitable for

Key specifications

How to use

Fit the blade into a compatible jigsaw according to the tool manufacturer's instructions, ensuring the blade is locked securely and oriented with the teeth facing forward. Select an appropriate cutting speed and feed rate for the workpiece; slower speeds and steady feed produce cleaner cuts in chipboard and fibreboard, while moderate speed is suitable for softwood. Replace blades when dull or damaged to maintain cutting quality.

Recommendations

For best results, clamp the workpiece firmly, use a guide or straightedge for long cuts, and allow the blade to cut without excessive force. Choose protective equipment and follow safety instructions of the jigsaw.