Manguera de aire comprimido Aerotec Superflex Pro 50 m, 20 bar, modelo 2005752

Aerotec Air Hose Superflex Pro 50 m, 20 bar, model 2005752 is a 50-metre pneumatic hose designed to deliver compressed air from compressors to tools, inflation devices and workshop equipment. Built for extended reach, the hose supports a working pressure of 20 bar and is intended for use in garages, construction sites and professional workshops as well as for demanding DIY tasks where a long, pressure-rated air line is required.

Advantages

The Superflex Pro combines long length with a rated working pressure of 20 bar to allow versatile placement of air tools without frequent compressor repositioning. Its flexible construction improves handling and reduces kinking during use, while the hose material is selected for resistance to abrasion and repeated bending in workshop environments. The hose is compatible with standard pneumatic fittings and connectors used for air supply applications.

Suitable for

• Supplying compressed air to pneumatic tools (impact wrenches, nailers, grinders)
• Inflation of tires and inflatable equipment
• Compressed air distribution in garages and maintenance bays
• Temporary or semi-permanent air supply on construction sites
• Large workshop layouts requiring extended hose reach

Key specifications

• Length: 50 m
• Rated working pressure: 20 bar
• Intended medium: compressed air
• Application: pneumatic supply for tools and inflation equipment
• Design: flexible hose construction suitable for repeated bending

How to use

Connect one end of the Aerotec Superflex Pro hose to a compatible compressor outlet using appropriate fittings and secure the connection with the correct coupling. Route the hose to the work area, avoiding sharp edges, hot surfaces and sources of pinching. Attach the tool or inflation device to the free end using the correct pneumatic connector. Before full operation, pressurize the hose and check all connections for leaks. Follow compressor manufacturer instructions for pressure settings, ensuring the operating pressure does not exceed 20 bar.

Recommendations

Inspect the hose periodically for signs of wear, cuts or severe abrasion and replace if damage is found. Store the hose coiled without tight kinks and keep it away from solvents, fuels and high heat sources. Use fittings and couplings rated for at least 20 bar and match thread types to avoid leaks.