Mortero de inyección FISCHER FIS VL 300 T HWK G gris — 20 cartuchos de 300 ml

FISCHER FIS VL 300 T HWK G is a grey injection mortar supplied as 20 cartridges of 300 ml each. Designed for anchoring threaded rods and reinforcing bars in drilled holes, the product is suitable for use in concrete and masonry. The boxed set provides sufficient volume for multiple fixings and is compatible with standard cartridge dispensing systems, supporting secure load-bearing connections and efficient installation on site.

Advantages

The injection mortar offers a cement-free chemical anchoring solution that cures to provide strong bond strength between fasteners and base materials. Supplied in 300 ml cartridges, the set of 20 allows continuous work without frequent resupply. The grey colour aids visual identification during application and curing. Compatibility with cartridge dispensing guns enables controlled dosing and reduced material waste.

Suitable for

• Anchoring threaded rods in drilled concrete holes
• Fixing rebar or dowels in masonry and concrete
• Applications requiring load-bearing chemical anchors
• Installation workflows using cartridge dispensing systems

Key specifications

• Packaging: 20 cartridges per box
• Cartridge volume: 300 ml each
• Colour: grey
• Form: injection mortar in cartridge form for dispensing guns
• Base materials: concrete and masonry (designed for anchoring in drilled holes)

How to use

Prepare the drilled hole by cleaning thoroughly with appropriate brushes and blow-out pump or compressed air to remove dust and debris. Fit the cartridge into a compatible dispensing gun and attach the static mixer nozzle. Discard initial material until a homogeneous mix appears, then inject the mortar from the back of the hole towards the opening to avoid air pockets. Insert the threaded rod or rebar with a steady rotary motion to ensure complete encapsulation. Allow the mortared anchor to cure according to ambient temperature and base material conditions before applying load.

Recommendations

Observe safety data and technical instructions provided by the manufacturer. Store cartridges in a cool, dry place and protect from freezing. Select appropriate drill diameter and embedment depth for the specified load requirements and follow curing times to achieve rated performance.