Interruptor basculante con accionamiento arriba y abajo

When a control interface demands reliable, tactile switching that springs back to a neutral center position, the NORDIC CONSIM rocker switch delivers exactly that. This momentary DPDT switch is built for applications where a spring-loaded return to OFF is essential—think hoists, winches, conveyor jog controls, or any machinery requiring a deliberate, temporary actuation in either direction.

Who is it for

Panel builders, industrial equipment manufacturers, and maintenance technicians who need a robust, panel-mount rocker switch with momentary action in both up and down positions. It suits control panels, test instruments, and automation systems where space is tight and reliability is non-negotiable.

Main features

• Momentary (ON)-OFF-(ON) action: returns to center OFF when released, preventing accidental sustained operation.
• DPDT contact configuration: two separate circuits can be switched simultaneously, enabling polarity reversal or dual-function control.
• High current capacity: rated 6A at 250VAC and 10A at 125VAC, suitable for many power and signal loads.
• Compact panel cutout: fits a standard 19.2 x 10.2 mm rectangular hole, ideal for dense control panels.
• Durable nylon 66 housing: resistant to impact, chemicals, and high temperatures, ensuring long service life.
• Quick connect or solder terminals: 4.8 mm tabs allow fast, secure wiring in production or field repairs.

Specifications

• Switch type: Rocker, momentary
• Contact configuration: DPDT (double pole double throw)
• Number of positions: 3 (up, off, down)
• Current rating: 6A @ 250VAC, 10A @ 125VAC, 10A @ 12VDC
• Voltage rating: 250VAC / 30VDC max
• Mounting: panel mount, cutout 19.2 x 10.2 mm
• Terminals: 6 x quick connect / solder lugs (4.8 mm)
• Actuator color: black
• Housing material: nylon 66
• Electrical life: 10,000 cycles
• Insulation resistance: >100 MΩ at 500VDC
• Contact resistance: <50 mΩ
• Operating temperature: -25°C to +85°C
• Dielectric strength: 1500VAC for 1 minute

Tips

For momentary reversing applications, wire the switch as a polarity-reversing DPDT: connect the motor leads to the center terminals and cross-connect the outer terminals to the power supply. Always verify your panel thickness—this switch is designed for panels up to 3 mm thick. Use 4.8 mm female quick-connect terminals with insulation for safe, vibration-resistant connections.