Cuenta Contacto
Tu carrito
Envío con DPD y FedEx
¿Dudas? Pregunte a la IA

Filamento PC/PBT (HT-UV-IMPACT) negro 1 kg Rosa3D

Filamento PC/PBT (HT-UV-IMPACT) negro 1 kg Rosa3D
Filamento PC/PBT (HT-UV-IMPACT) negro 1 kg Rosa3D
54,33 €
PDF
PDF
Stock AgotadoSin stock Código 4422256 Modelo PC/PBT-BLA-175-1-RO Garantía 3 años

Envíos y devoluciones

Descripción

PC/PBT (HT-UV-IMPACT) is a filament for industrial and automotive applications.

The material has been modified for impact strength and heat resistance, and infused with an anti-UV stabiliser.

The addition of polybutylene terephthalate (PBT) to Polycarbonate means less deformation on 3D printed parts than with pure PC.

The material is easier to print than PC and most common PC/ABS blends, does not emit unpleasant odours during printing, has relatively low shrinkage for this group of materials (up to 1%) and very good adhesion to the table.

Its excellent mechanical properties, very good impact strength and resilience, combined with the ability to be used outdoors (UV resistant) and the possibility of operating at relatively high temperatures (90-110C), make it an excellent construction material with a wide range of applications.

Both in terms of impact strength and temperature resistance, the material performs better than the popular PET-G and ABS, while it is easier to print than PC and PC-ABS.

Recommended printing parameters

  • Extrusion temperature: 240-260°C
  • Bed temperature: 90-110°C
  • Chamber temperature: 50-80°C
  • Air supply: 0-20% (depends on model geometry)
  • Compatible worktables: glass, smooth PEI, textured PEI
  • The filament can be printed on both direct and Bowden feed printers.
  • We recommend closing the chamber.

If there are problems with adhesion, we recommend using adhesion formulations.

Due to the high printing temperatures, it will be necessary to fit a full-metal heatbreak (without the Teflon tube inside).

Product parameters

  • Color: black
  • Diameter: 1.75 mm
  • Weight: 1000 g (vacuum packed)
  • Density: 1.20 g/cm3
  • Odor: odourless
  • Vicat softening point: 120°C (50N, 50°C/h)
  • Diameter tolerance: +/- 0.05
  • Oval tolerance: +/- 0.02

Especificaciones

Especificaciones
Categoría
Filamento para impresoras 3D
Color del producto
Negro
EAN
5907753132130
Marca
Rosa3D
Material
Policarbonato
Modelo
PC/PBT-BLA-175-1-RO
MPN
PC/PBT-BLA-175-1-RO
Historial de precios de los últimos 6 meses
Filamento PC/PBT (HT-UV-IMPACT) negro 1 kg Rosa3D
Actual
54,33 €
Mínimo 7 d
53,60 €
Máximo 7 d
54,33 €
Variación 24 h
+0,73 €   +1%
Variación 7 d
—   
Variación 30 d
—   

Escribir una opinión

Valoración *
Tu nombre se mostrará públicamente: puedes usar un apodo. Invitamos a los compradores a escribir opiniones; las revisamos antes de publicarlas y publicamos también las críticas.

Misma serie y alternativas

12

Productos populares en esta categoría

8
Vendedor: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilna, Lituania · Código de empresa 303192950 · NIF-IVA UE LT100008198612 · Envío desde la UE (Lituania)
WhatsApp
Messenger
Hola, soy el asistente de IA de DistriNode. Puedo ayudarte a encontrar productos, comparar opciones, crear presupuestos en PDF o abrir solicitudes de soporte.
Todas las categorías