RUKO HAB-SDS18.0x200x150mm broca percusora SDS-plus 18 mm

Drilling through reinforced concrete quickly wears down ordinary bits, causing wandering holes and premature failure. The RUKO HAB-SDS18.0x200x150mm SDS-plus hammer drill bit solves this with a solid carbide head and 4-cutter geometry that maintains a precise bore even when hitting rebar.

Who is it for

Professional contractors and serious renovators who need reliable performance in concrete, masonry, natural stone, and reinforced concrete. Compatible with all SDS-plus rotary hammers.

Main features

• 18 mm diameter with 150 mm working length and 200 mm total length
• Solid carbide head with 4-cutter geometry for clean, accurate holes
• 4-flute helix rapidly removes dust, reducing heat and increasing speed
• Active centering tip prevents wandering at the start of the hole
• Wear mark indicator shows when the bit reaches its service limit
• High resistance to rebar impact for longer life in tough conditions

Specifications

• Drill bit type: Hammer drill bit
• Shank type: SDS-plus
• Diameter: 18 mm
• Working length: 150 mm
• Total length: 200 mm
• Material suitability: Concrete, masonry, reinforced concrete, natural stone
• Cutting edge design: 4-cutter geometry
• Head material: Solid carbide
• Flute design: 4-flute helix
• Centering tip: Active
• Wear mark indicator: Yes
• Series: SDS-plus-5X
• Manufacturing standard: DIN ISO 5468

Tips

Use a rotary hammer in hammer drilling mode only. Apply steady pressure and let the tool do the work. The wear mark indicator helps you replace the bit before performance drops.