RUKO HGB-III DIN 352 HSS 60° M16 x 2,00 mm macho de roscar manual a izquierdas

This RUKO hand tap is engineered for cutting left-hand metric coarse threads, a configuration that is harder to find than standard right-hand taps and essential for reverse-rotation applications. The HGB-III series follows DIN 352, so the geometry and dimensions are consistent with European tooling standards.

Highlights

• High-speed steel (HSS) body for durability and heat resistance.
• Left-hand thread direction for reverse-threaded holes.
• Metric coarse thread M16 with 2.00 mm pitch.
• 60° thread angle and 6H tolerance class for standard fits.
• Straight flutes with 4 flutes for efficient chip evacuation.

In daily use

The tap has an overall length of 105 mm and a thread length of 30 mm, with a 12.0 mm shank diameter and a 9.0 mm square drive for secure tool holding. The bright finish reduces friction and helps prevent material build-up on the cutting edges. It is suitable for general purpose threading in through holes and blind holes.

Full specifications

• Product type: Hand Tap
• Material: High-Speed Steel (HSS)
• Standard: DIN 352
• Thread type: Metric Coarse Thread
• Thread size: M16
• Thread pitch: 2.00 mm
• Thread direction: Left-Hand (LH)
• Thread angle: 60°
• Tolerance class: 6H
• Overall length: 105 mm
• Thread length: 30 mm
• Shank diameter: 12.0 mm
• Square drive size: 9.0 mm
• Number of flutes: 4
• Flute type: Straight Flute
• Surface finish: Bright

Final note

A left-hand M16 tap from RUKO's HGB-III line, built to DIN 352 and ready for reverse-thread cutting tasks.