RUKO KES Form C 90° 8,0mm conector de válvula DIN, 2+PE, 250V/10A, IP65, negro

Industrial hydraulic and pneumatic valves often require a reliable electrical connection that withstands vibration, moisture, and frequent mating cycles. The RUKO KES Form C 90° 8.0mm DIN valve connector provides a secure 2-pole plus protective earth interface with an 8.0 mm pin spacing, conforming to EN 175301-803 (formerly DIN 43650). Its 90° angled design allows cable routing in tight spaces, while the screw terminals accept conductors up to 1.5 mm² (AWG 16). The M16 cable gland ensures strain relief and maintains IP65 protection when properly mated.

Who is it for

This connector is intended for maintenance technicians, machine builders, and automation engineers who need a robust, field-serviceable connection for solenoid valves, pressure switches, and other DIN-style components.

Main features

• Form C geometry with 8.0 mm pin spacing, 2 poles + protective earth
• 90° angled housing for space-constrained installations
• Screw terminal termination for simple field wiring
• M16 cable gland for secure cable entry and strain relief
• Rated for 250 V AC/DC and 10 A current
• IP65 protection when mated, suitable for harsh environments
• Polyamide housing, black, with silver-plated copper alloy contacts
• Operating temperature range: -40°C to +90°C

Specifications

• Connector type: DIN valve connector, Form C
• Standard: EN 175301-803 (formerly DIN 43650)
• Number of poles: 2 + protective earth (PE)
• Pin spacing: 8.0 mm
• Orientation: 90° angled
• Rated voltage: 250 V AC/DC
• Rated current: 10 A
• Protection class: IP65 (when mated)
• Termination method: screw terminals
• Cable gland thread: M16
• Max. wire gauge: 1.5 mm² (AWG 16)
• Housing material: polyamide (PA), black
• Contact material: copper alloy, silver-plated
• Gasket material: NBR
• Operating temperature: -40°C to +90°C
• Flammability rating: UL 94 V-0

Tips

Ensure the cable gland is tightened to the recommended torque to maintain the IP65 seal. Use a suitable screwdriver to secure conductors in the screw terminals, and verify the protective earth connection before energizing the circuit.