RUKO SCE-DIN223-MF 4x0,35mm² cable de control de PVC apantallado, gris

Electromagnetic interference can corrupt signals in industrial control and data lines, causing erratic behaviour or downtime. The RUKO SCE-DIN223-MF 4x0.35mm² cable solves this with a tinned copper braid shield and twisted-pair construction, ensuring reliable transmission in EMC-critical environments.

Who is it for

Automation engineers, panel builders, and maintenance technicians who need a robust, shielded cable for data, control, and signal wiring in machinery, plants, and equipment where electrical noise is a concern.

Main features

• 4 cores, 0.35 mm² cross-section, fine wire bare copper conductor
• PVC core insulation with DIN 47100 colour coding for easy identification
• Cores twisted into pairs and concentrically stranded to reduce crosstalk
• Tinned copper braid shielding for excellent EMC protection
• Grey PVC outer sheath (RAL 7032), flame retardant per IEC 60332-1-2
• Nominal voltage 250 V, test voltage 1500 V
• Temperature range: -30°C to +80°C fixed, -5°C to +70°C flexible
• Outer diameter approx. 5.6 mm

Specifications

• Cable type: UNITRONIC LiYCY (TP)
• Number of cores: 4
• Conductor cross-section: 0.35 mm²
• Conductor material: Bare copper, fine wire strand
• Core insulation: PVC
• Core identification: DIN 47100 colour coded
• Stranding: Cores twisted into pairs, then concentrically
• Shielding: Tinned copper braid
• Outer sheath: PVC, grey (RAL 7032)
• Outer diameter: 5.6 mm
• Nominal voltage: 250 V
• Test voltage: 1500 V
• Temperature range fixed: -30°C to +80°C
• Temperature range flexible: -5°C to +70°C
• Flame retardancy: IEC 60332-1-2
• Capacitance core/core: 120 nF/km
• Application: Data, control, signal transmission in EMC critical environments

Tips

For best EMC performance, ensure the shield is properly grounded at both ends using suitable EMC cable glands. Avoid exceeding the minimum bending radius during installation.