RUKO SLS-SPS Vapor 55 mm Rodamiento rígido de bolas con juntas de goma

When rotating shafts run hot, noisy, or wear out too soon, the cause is often a bearing that cannot hold its grease or keep out dirt. The RUKO SLS-SPS Vapor 55 mm deep groove ball bearing solves that with two contact rubber seals and C3 internal clearance, giving you smooth, low-friction rotation in demanding industrial and mechanical applications.

Who is it for

Maintenance technicians, machine builders, and repair workshops who need a dependable single-row bearing for electric motors, pumps, gearboxes, conveyors, and similar equipment with a 55 mm shaft.

Main features

• Deep groove ball bearing, single row, for high radial and moderate axial loads.
• Bore 55 mm, outer diameter 100 mm, width 21 mm.
• 2RSR contact rubber seals on both sides keep grease in and contaminants out.
• C3 internal clearance handles thermal expansion and interference fits.
• Bearing steel 100Cr6 (AISI 52100) with sheet steel cage, pre-lubricated with grease.

Specifications

• Bearing type: Deep groove ball bearing
• Number of rows: Single row
• Bore diameter (d): 55 mm
• Outer diameter (D): 100 mm
• Width (B): 21 mm
• Sealing: 2RSR (two contact rubber seals)
• Internal clearance: C3
• Dynamic load rating: 52 kN
• Static load rating: 31 kN
• Limiting speed (grease): 6300 rpm
• Limiting speed (oil): 8000 rpm
• Material: Bearing steel 100Cr6 / AISI 52100
• Cage material: Sheet steel
• Lubrication: Pre-lubricated with grease
• Operating temperature: -30°C to +100°C
• Precision class: P0 (normal)

Tips

Check shaft and housing tolerances before fitting; C3 clearance suits press fits and higher temperatures. Avoid washing the bearing with solvents, as this removes the factory grease.