Set de brocas Einhell 49108788 95 piezas

The Einhell 49108788 Drill bit set 95 pc(s) is a comprehensive accessory kit assembled in an XL case for general drilling and screwing tasks. The set contains a wide range of bits, metal and masonry drill bits, wood twist and flat bits, sockets, a countersink, drill stops and a quick-change bit holder. All components are stored in a rigid storage box with transparent lid and auto-lock clip closure, and are compatible with common cordless screwdrivers and drills via standard C 6.3 / E 6.3 shanks.

Advantages

The set combines S2 steel driver bits, HSS metal drill bits, carbide-tipped masonry drills and C45 wood bits to provide durability and versatility across materials. The quick-change 60 mm bit holder with strong magnet enables fast bit swaps and secure retention. The transparent lid and organised inserts keep components visible and accessible, while the robust case protects tools during transport and storage.

Suitable for

• Drilling into masonry, concrete and stone
• Drilling and countersinking in hardwood and softwood
• Drilling thin sheet metal and plastic components
• Screwing and fastening work with multiple driver profiles
• General DIY, repair and installation tasks

Key specifications

• Contents: 95 pieces in XL case with transparent lid and auto-lock clip
• Driver bits: 49 × 25 mm (C 6.3 shank) and 8 × 50 mm (E 6.3 shank) made of S2 steel
• Metal drill bits: 8 pieces HSS 4241, diameters 2 × 3, 2 × 4, 2 × 5, 2 × 6 mm; E 6.3 shank
• Masonry drill bits: 8 pieces tool steel, carbide tip, diameters 3, 4, 5, 6, 7, 8, 9, 10 mm; E 6.3 shank
• Wood twist bits: 5 pieces C45 tool steel, diameters 3, 4, 5, 6, 8 mm; E 6.3 shank, centre point
• Flat wood bits: 5 pieces C45 steel, diameters 12, 14, 16, 18, 22 mm; E 6.3 shank, spiral or cutting geometry for fast chip removal
• Sockets: 5 pieces manganese-phosphated CV steel, sizes 5, 6, 8, 10, 13 mm with hexagon socket
• Countersink: 12 mm diameter, six cutting edges, E 6.3 shank
• Quick-change bit holder: 60 mm carbon steel with metal sleeve and strong magnet
• Drill stops: 4 pieces (5, 6, 8, 10 mm) with fixing screw and 2.5 mm Allen key
• Compatible with standard cordless screwdrivers and drills (common chucks and bit holders)
• Suitable materials: hardwood, masonry, plastic, thin sheet metal, wood

How to use

Select the appropriate drill or driver bit for the material and hole size required. Fit the chosen bit into the drill chuck or into the quick-change bit holder, ensuring the shank is fully seated. For repetitive depth-controlled holes, set a drill stop to the required depth and tighten the fixing screw with the supplied 2.5 mm Allen key. Use lower speed and steady pressure for masonry and metal drilling, and higher speeds for wood where recommended. When countersinking, use the 12 mm countersink to recess screw heads so they sit flush with the surface.

Recommendations

Use appropriate safety equipment such as eye protection and dust extraction. Match drill speed and feed pressure to material: slower speeds and firm support for masonry and metal, higher speeds and light pressure for wood. Keep bits sharp and clean; replace worn masonry or carbide tipped bits to maintain efficiency. Store components in the provided case to prevent loss and damage.