Sierra de corona Bosch 2 608 587 113 individual azulejo de pared de cerámica blanda 3 cm

Bosch Drill Hole Saw 2 608 587 113 is a single-piece diamond cutter made for dry drilling in soft ceramic wall tiles. The tool has a working length of 3 cm and a cutting diameter of 1.4 cm, designed to deliver precise holes with minimal chipping when used on soft ceramic substrates.

Advantages

The single-piece construction provides stability and consistent cutting performance. A diamond cutting edge enables clean holes in soft ceramic wall tiles while reducing the risk of breakage. Compact dimensions and a 3 cm working length make the hole saw suitable for shallow tile drilling and installations where space is limited.

Suitable for

Key specifications

How to use

Mark the centre of the hole on the tile and secure the workpiece to prevent movement. Fit the Bosch drill hole saw onto a compatible drill or rotary tool according to the drill’s chuck or arbor requirements. Use the tool in dry mode as intended, start at low speed to establish the cut and increase speed moderately while applying steady, even pressure. Keep the drill perpendicular to the tile surface to maintain a clean, round hole. After cutting, remove any debris and check the hole for burrs before installing fixtures.

Recommendations

For best results, use the hole saw on soft ceramic wall tiles only, avoid excessive lateral force, and ensure the tile is properly supported to reduce risk of cracking. Verify compatibility with your drill’s chuck and follow manufacturer safety guidelines and eye protection requirements.