Sierra de corona Bosch 2 608 900 478, individual, para taladro, Ø 92 mm, para tableros de partículas, ladrillo, azulejos de cerámica blanda, madera blanda

The Bosch EXPERT Construction Material hole saw with a 92 mm diameter is designed for making circular openings in particle board, brick, soft ceramic wall tiles and softwood. Supplied as a single unit for use with drills, it is intended for installations such as plumbing, ventilation and general building or renovation tasks where mixed construction materials are encountered.

Advantages

This hole saw offers extended service life thanks to Bosch Carbide Technology and individually ground carbide teeth that maintain cutting performance in abrasive and mixed materials. It is built to withstand repeated use on building sites and, when used with the Bosch Power Change Plus keyless arbor, provides accurate and robust attachment to compatible drill arbors.

Suitable for

• Cutting circular openings in particle board
• Making holes in brick and masonry
• Drilling through soft ceramic wall tile
• Creating openings in softwood for installations

Key specifications

• Diameter: 92 mm
• Compatible materials: particle board, brick, soft ceramic wall tile, softwood
• Tooth material: fine, hard carbide (individually ground teeth)
• Intended use: for hand-held drills with appropriate arbor
• Delivery: single hole saw (without arbor)

How to use

Mount the hole saw on a compatible drill arbor (Bosch Power Change Plus keyless arbor recommended for best fit) and secure it according to the arbor manufacturer’s instructions. Mark the center of the desired opening, start drilling at low speed to establish the pilot position, then increase speed and apply steady pressure while keeping the drill perpendicular to the work surface. Allow the carbide teeth to cut without forcing; reduce speed when cutting hard or abrasive materials and clear debris periodically to prevent clogging.

Recommendations

Use appropriate personal protective equipment (safety glasses, dust mask and gloves). For optimal lifetime, avoid excessive side pressure and let the tool cool between long cuts. Replace worn or damaged teeth/cutters and use the recommended arbor type for secure mounting.