ACT 100 metros cable interior/exterior monomodo 9/125 OS2 12 fibras con conectores LC

ACT 100 meter Singlemode 9/125 OS2 indoor/outdoor cable 12 fibers with LC connectors is a pre-terminated fiber optic installation cable with 12 singlemode fibers and factory-fitted LC connectors. The cable is designed for both indoor and outdoor use and is suitable for connecting rooms, floors or buildings. Each cable is individually tested after production and supplied with a test report, which removes the need for in-house termination tools and test equipment.

Advantages

Pre-terminated ACT cables arrive ready to install, eliminating connector termination on site and reducing installation time. They meet the CPR Dca Euroclass requirement for building materials and provide low optical attenuation with typical values around 0.10 dB and a maximum of 0.15 dB per connector, giving extra margin in optical budgets. The construction includes transparent protective tubing around the connectors and fanouts, a robust outer assembly with a drawbar eye rated up to 350 N pulling force, and an 18 mm protective hose diameter that eases installation through conduits.

Suitable for

• Connecting two buildings on a campus or site
• Installing between different floors in commercial or residential buildings
• Linking separate rooms or server cabinets within a facility

Key specifications

• Length: 100 meter
• Fiber type: Singlemode 9/125 OS2
• Number of fibers: 12
• Connectors: LC (factory-fitted)
• Typical attenuation: 0.10 dB (average)
• Maximum attenuation: 0.15 dB
• CPR classification: Dca Euroclass
• Maximum tensile load: up to 350 N (with drawbar eye)
• Protective hose diameter: 18 mm

How to use

Uncoil the pre-terminated ACT cable and route it through the intended path, using the integrated drawbar eye when pulling is required. Feed the 18 mm protective hose through conduits or cable trays, then remove the transparent tubing only at the final connection points to expose the LC connectors. Connect LC connectors to matching adapter panels, patch panels or devices. Verify the cable identity and consult the factory test report if needed. Avoid bending the cable beyond recommended minimum bend radius and do not exceed the rated pulling force.

Recommendations

Scan the QR code on the cable for specific installation instructions and handling information. Ensure installers follow local building codes and CPR requirements. Store and handle cables in a dry, dust-free environment and avoid sharp bends or impacts during installation.