ACT Cable de alimentación C19 IEC Lock - C20 IEC Lock Dual Locking blanco 2 m, PC3639

The ACT Powercord C19 IEC Lock to C20 IEC Lock Dual Locking white 2 m is a 2‑meter power cable designed for secure equipment and PDU connections. It features a C19 IEC Lock on one end and a C20 IEC Lock Dual Locking connector on the PDU end, providing a universal locking mechanism that works with major PDU brands and does not require tools or a PDU-mounted lock.

Advantages

The dual locking design secures the cable at both equipment and PDU ends, reducing the risk of accidental disconnection and minimizing potential downtime and damage. The C20 connector locks at the top and side for additional retention. The universal lock is compatible with PDUs from different manufacturers, and the cable is available in multiple colors for easy identification. Rated for up to 250 V and 16 A where applicable.

Suitable for

Key specifications

How to use

Insert the C19 IEC Lock into the device inlet and the C20 IEC Lock Dual Locking connector into the PDU outlet until the locking mechanism engages. No tools are required. To remove the cable, release the lock according to the connector’s release method and pull the plug out. Ensure the system is powered down or follow safe hot‑swap procedures as required by your equipment before disconnecting.

Recommendations

Use the ACT Powercord in rack and cabinet installations where accidental cable release must be avoided. Select a color variant for easier circuit identification and confirm voltage/current ratings are compatible with local standards (e.g., Europe/Australia 16A/250V~; USA/Canada/Japan usage subject to rated current and voltage differences).