ACT Cable de alimentación conector CEE 7/7 acodado C15 azul 1,5 m 230V 10A

The ACT Powercord mains connector CEE 7/7 male angled with C15 coupler is a 1.5 m, 230 V / 10 A supply cable designed for equipment that can reach higher temperatures at the inlet. The blue H05RN-F cable provides flexibility and mechanical resistance and is commonly used to power network switches and similar devices requiring an IEC C15 inlet.

Advantages

The angled CEE 7/7 plug combined with an IEC C15 coupler allows a secure fit in sockets and equipment with a recessed or heat-sensitive inlet. The H05RN-F construction ensures good flexibility and durability in standard indoor environments. A 1.5 m length offers a practical balance between reach and cable management while the 10 A rating and 230 V compatibility match typical European mains requirements.

Suitable for

• Powering network switches
• Equipment with IEC C15 inlet that may run hotter at the connector
• Server room or office devices requiring a 1.5 m power lead

Key specifications

• Connector 1: CEE 7/7 angled (male)
• Connector 2: IEC C15 coupler
• Cable length: 1.5 m
• Rated voltage/current: 230 V, 10 A
• Cable type: H05RN-F (flexible rubber)
• Colour: Blue
• Brand/MPN/EAN: ACT / AK5295 / 8716065509304

How to use

Insert the angled CEE 7/7 plug into an appropriate mains socket and connect the IEC C15 coupler to the device inlet. Ensure the device inlet is an IEC C15 type and that the mains supply matches the rated 230 V / 10 A. Route the cable to avoid sharp bends, pinching or contact with hot surfaces. Disconnect power before connecting or disconnecting the coupler from powered equipment.

Recommendations

Use this powercord for indoor applications where an IEC C15 inlet is specified; avoid permanent outdoor exposure and replace the cable if the sheath shows damage or wear.