ACT Cable de conexión slimline verde de 2 metros LSZH U/FTP CAT6A para centro de datos con conectores RJ45 con protección de pestaña

Patch Cable ACT Green 2m LSZH U/FTP CAT6A is a slimline data centre patch cord with U/FTP shielding and snagless RJ45 connectors. With a 2 m length, gold-plated contacts and a reduced outer diameter (approx. 3.8 mm), this CAT6A cable is designed for high-speed networking in dense rack environments where improved airflow and reduced cable bulk are important.

Advantages

The slim 3.8 mm diameter reduces congestion in cable channels and cabinets, improving airflow compared with standard 5.9 mm CAT6A patch cords. U/FTP shielding minimises crosstalk and external interference, while gold-plated contacts ensure reliable signal transmission. LSZH jacket material reduces hazardous smoke and corrosive gases in case of fire.

Suitable for

• Data centre top-of-rack and patch panel connections
• High-density network racks and cabinets
• Applications requiring reduced cable diameter for improved airflow
• Short permanent link installations where 32 AWG patch cords are acceptable

Key specifications

• Cable type: U/FTP CAT6A slimline
• Length: 2 m
• Outer diameter: approx. 3.8 mm (slimline)
• Connectors: RJ-45 to RJ-45, snagless
• Contacts: gold-plated
• Jacket: LSZH
• Brand / MPN / EAN: ACT / DC7702 / 8716065442199

How to use

Connect one RJ45 end to the network port of your switch, patch panel or device and the other end to the corresponding port. Route the 2 m cable within the cabinet or tray taking advantage of its slim profile to reduce bend radius and congestion. For reliable high-frequency performance, avoid unnecessary cable stress or sharp bends and maintain appropriate separation from high-power sources.

Recommendations

Use a maximum bundle size of 24 cables in PoE applications to limit temperature rise; the ANSI TSB-184-A guideline restricts temperature increase to less than 15 °C above ambient for the centre cable in a bundle. Because slimline cables may use thinner conductors (e.g., 32 AWG), ACT recommends shorter permanent link lengths compared with standard 24 AWG patch cords to accommodate the higher attenuation at higher frequencies.