ACT Cable de instalación premontado macizo S/FTP CAT6A B2ca PoE++ 100W azul de 85 metros, conector RJ45 macho – hembra

The ACT CAT6A S/FTP prefab solid installation cable (85 m) is a pre-terminated network cable designed for structured cabling and patching. It delivers Cat6A performance for 10 Gigabit Ethernet, supports PoE++ up to 100 W (4PPoE / type 4) and is rated to CPR Euroclass B2ca for use in high-risk environments. The cable has full copper 23AWG conductors, 50 µ gold-plated RJ45 contacts terminated via IDC, and meets international standards ANSI/TIA-568.2-D and ISO/IEC 11801-1.

Advantages

Pre-terminated RJ45 connectors remove the need for on-site termination, reducing installation time and the risk of wiring errors. The solid 23AWG copper conductors and IDC contacts provide a stable connection suitable for sustained 100 W PoE++ operation. Euroclass B2ca fire rating ensures compliance with strict building safety requirements for installations in data centres, commercial and public buildings.

Suitable for

• Structured cabling in commercial buildings and data centres
• Power over Ethernet installations requiring up to 100 W (4PPoE / PoE++ type 4)
• Patching and fixed point-to-point connections where plug-and-play prefab cabling is preferred

When it may not be suitable

This prefab solid installation cable is intended for permanent installations and may be less suitable where frequent moves, adds or changes are required, or where extremely short custom cable runs are needed. It is not appropriate where flexibility of stranded patch cords is specifically required.

Key specifications

• Cable type: S/FTP (S-STP) Cat6A solid
• Length: 85 m
• Conductors: full copper 23AWG solid cores
• Connectors: RJ45 male and RJ45 female with 50 µ gold-plated contacts, IDC termination
• PoE support: 4PPoE / PoE++ up to 100 W (type 4)
• Fire performance: CPR Euroclass B2ca, s1a, d0, a1
• Standards: ANSI/TIA-568.2-D and ISO/IEC 11801-1
• Colour: Blue

How to use

Install the pre-terminated cable as part of your structured cabling run between patch panels, outlets or devices. Simply route the cable to the required endpoints, secure the cable according to local installation practice, and plug the RJ45 male and female connectors into the corresponding ports. No termination tools or on-site crimping are required; verify connections and test for continuity and network performance after installation.

What to consider before purchase

• Required run length and available cable lengths (this product is 85 m)
• Whether a solid installation cable is appropriate versus stranded patch cords for the intended use
• Compatibility with your PoE equipment if using up to 100 W PoE++ (4PPoE)
• Installation environment and need for CPR Euroclass B2ca fire rating

Recommendations

For reliable PoE++ operation and compliance with building safety, use this pre-terminated ACT Cat6A S/FTP cable in fixed installations such as data centres, server rooms and structured commercial networks. Test the installed links with appropriate Cat6A certification or verification tools to confirm performance for 10 Gigabit Ethernet and 100 W PoE applications.