ACT Industrial cable Profinet de 2,50 metros conector macho RJ45 a conector macho RJ45, cable TPE Superflex CAT6A SF/UTP, apantallado

The ACT Industrial 2.50m RJ45 to RJ45 Cat6a network cable is a shielded Superflex SF/UTP TPE Profinet cable designed for industrial environments. It features RJ45 male connectors on both ends, Cat6a performance, a TPE outer sheath for increased mechanical resistance and an IP67-rated overmoulded connector. Each conductor is made from 28 copper strands (AWG26 equivalent) to provide higher flexibility compared with typical AWG24/7 patch cables, while shielding reduces electromagnetic interference for stable high-speed data transmission.

Advantages

The TPE sheath and overmoulded TPE connectors provide enhanced resistance to abrasion, bending and repeated movement in cable chains. The Superflex SF/UTP construction with 28-strand conductors (AWG26) increases flexibility for tight routing and dynamic installations. Cat6a shielding and gold-plated contacts improve signal integrity and corrosion resistance, ensuring reliable connections in industrial network setups.

Suitable for

Key specifications

How to use

Connect each RJ45 male plug to the corresponding RJ45 port on network devices such as switches, PLCs or industrial routers. Ensure connectors are fully seated until the locking clip engages. Route the cable following recommended bend radii for Superflex TPE cables and avoid sharp kinks. For installations in cable chains or moving applications, secure the cable with appropriate clamps or guides to prevent excessive tensile stress on connectors.

Recommendations

For best performance, use this Cat6a ACT Industrial cable in shielded network segments and maintain recommended bend radius and strain relief. Inspect connectors periodically for wear in high-motion applications and replace the cable if the TPE sheath or overmould shows damage.