Adaptador de cable de vídeo DELOCK 61849 0,125 m DisplayPort a HDMI

This DisplayPort adapter by Delock allows connection of an HDMI display, such as a flatscreen or monitor, to a PC or other DisplayPort-equipped device. The compact cable adapter features a DisplayPort 20‑pin male connector and an HDMI Type A 19‑pin female connector, and is approximately 0.125 m long.

Advantages

The adapter supports DisplayPort 1.1a and High Speed HDMI, enabling resolutions up to 1920 x 1200 and HDTV output up to 1080p. It includes standby detection to automatically enter sleep mode when appropriate, and has a ferrite core for improved signal integrity. Its short length and standard connectors make it suitable for tight installation spaces and straightforward one‑to‑one connections between DisplayPort sources and HDMI displays.

Suitable for (tasks / use cases)

• Connecting a PC or laptop with DisplayPort output to an HDMI monitor or TV
• Temporary setup in tight spaces where a short adapter cable is required
• Replacing a lost or damaged short DisplayPort-to-HDMI cable

Key specifications

• Brand: DELOCK
• Model / MPN: 61849
• Connectors: DisplayPort 20‑pin male → HDMI Type A 19‑pin female
• DisplayPort specification: 1.1a
• HDMI: High Speed
• Maximum resolution: up to 1920 x 1200; HDTV up to 1080p
• Cable length: approx. 0.125 m (12.5 cm) without connectors
• Colour: Black
• Ferrite core: 1x

How to use

Insert the DisplayPort male connector into the DisplayPort output of your PC or laptop and connect an HDMI cable from the adapter’s HDMI female port to the HDMI input on the monitor or TV. Power on both devices and select the appropriate HDMI input on the display. The adapter is plug-and-play with supported resolutions; if necessary, adjust display resolution and output settings within the operating system.

Recommendations

Use this short adapter in close‑range connections only; for longer distances use a full‑length HDMI or DisplayPort cable rated for the required resolution. Avoid excessive bending near the connectors and keep the ferrite core clear of tight clamps to maintain signal quality.