Adaptador Ethernet Lindy USB 3.2 Type-C 2.5G 43314

The Lindy USB 3.2 Type C to 2.5G Ethernet Converter provides a compact way to add wired network connectivity to devices with a USB Type-C port. It enables connection to 2.5 Gigabit Ethernet networks using existing Cat.5e/6 cabling and delivers data rates up to 2.5 Gbps when paired with network equipment that supports 2.5GBASE-T (IEEE 802.3bz). The adapter is bus-powered, lightweight (0.034 kg) and finished in silver, making it suitable for thin laptops, notebooks and tablets that lack an integrated RJ45 port. It is compatible with USB 3.2 hosts and Thunderbolt 3 ports.

Advantages

The converter supports up to 2.5 Gbps over standard Cat.5e/6 cabling and requires no external power since it is powered via the USB bus. Its small, portable aluminium-coloured housing is convenient for mobile use and it is compatible with USB 3.0/3.1/3.2 host interfaces as well as Thunderbolt 3, offering broad device compatibility.

Suitable for

• Thin-and-light laptops and ultrabooks without an RJ45 port
• Tablets and convertibles with USB Type-C or Thunderbolt 3 ports
• Workstations that need upgraded wired connectivity to 2.5G
• Home or office networks using Cat.5e or Cat.6 cabling where 2.5G is supported

Key specifications

• Interface: USB Type-C (USB 3.2 compatible)
• Network: 2.5GBASE-T (up to 2.5 Gbps) — requires switch/switchport support
• Cabling: Compatible with Cat.5e / Cat.6
• Power: Bus-powered via USB — no external PSU required
• Weight: 0.034 kg
• Colour: Silver
• Compatibility: Works with USB 3.0/3.1/3.2 hosts and Thunderbolt 3 ports

How to use

Connect the converter's USB Type-C plug to the USB-C or Thunderbolt 3 port on your device, then connect an Ethernet cable from the converter's RJ45 port to your network switch or router. Ensure the network switch or access point supports 2.5GBASE-T if you require 2.5 Gbps speeds. The adapter is bus-powered and will be recognised by the host operating system; install drivers if prompted by your operating system.

Recommendations

For best performance at 2.5 Gbps, use Cat.5e or Cat.6 cabling in good condition and verify that the connected network equipment explicitly supports 2.5GBASE-T (IEEE 802.3bz). If maximum throughput is not achieved, check host USB port generation (USB 3.2/3.1 Gen 2 preferred) and update drivers or firmware as needed.