Anycubic filamento PETG crema 1,75 mm 1 kg

3D printing with standard filaments often leads to warping, weak layer adhesion, and poor chemical resistance, limiting the durability of your functional parts. The Anycubic PETG Filament in Cream solves these issues with a material that combines the ease of PLA with the strength of ABS. This 1 kg spool of 1.75 mm PETG delivers consistent, high-quality prints with a smooth, matte cream finish, perfect for both prototypes and end-use parts.

Who is it for

This filament is ideal for hobbyists, educators, and professionals who need reliable, tough prints without the hassle of an enclosed printer. Whether you're making mechanical components, storage solutions, or decorative items, PETG offers the perfect balance of printability and performance. Its low warping and good layer adhesion make it accessible for users of all skill levels.

Main features

• Premium PETG material: strong, flexible, and resistant to chemicals and moisture.
• Precision diameter: 1.75 mm with ±0.02 mm tolerance for smooth, clog-free extrusion.
• Low warping and excellent layer adhesion for reliable prints on open-frame printers.
• Wide printing temperature range: 230–250 °C, compatible with most FDM printers.
• Beautiful cream colour with a subtle sheen, ideal for aesthetic and functional parts.
• Vacuum-sealed with desiccant to maintain dryness and print quality.

Specifications

• Material: PETG (Polyethylene Terephthalate Glycol)
• Filament diameter: 1.75 mm
• Diameter tolerance: ±0.02 mm
• Net weight: 1 kg (2.2 lbs)
• Colour: Cream
• Recommended nozzle temperature: 230–250 °C
• Recommended bed temperature: 70–80 °C
• Print speed: 40–80 mm/s
• Density: 1.27 g/cm³
• Tensile strength: 50 MPa
• Elongation at break: 200%
• Heat deflection temperature (HDT): 70 °C
• Spool dimensions: diameter 200 mm, hub diameter 55 mm, width 65 mm
• Compatibility: FDM 3D printers with 1.75 mm filament support

Tips

For best results, print on a heated bed at 70–80 °C with a thin layer of glue stick or blue painter's tape to prevent over-adhesion. Store the filament in a dry box or resealable bag with desiccant when not in use, as PETG can absorb moisture and affect print quality. If you experience stringing, reduce the nozzle temperature slightly and increase retraction distance.