AZO DIGITAL regulador de carga solar AZO MPPT-60D PRO (LCD) 60A MPPT

The AZO DIGITAL Solar Charge Controller AZO MPPT-60D PRO (LCD) is a high-performance MPPT solar regulator designed for off-grid solar systems. With a rated charge current of 60A and support for system voltages from 12V to 48V auto-detection, it maximizes energy harvest from your solar panels. The LCD display provides real-time system monitoring, and the controller is compatible with various battery types including Gel, Sealed, Flooded, and Lithium (LiFePO4, Li-ion).

Advantages

This MPPT controller features >99.5% MPPT tracking efficiency and up to 98% conversion efficiency, ensuring minimal power loss. Its multi-stage charging algorithm (Bulk, Absorption, Float, Equalization) prolongs battery life. The common negative grounding design simplifies installation, and comprehensive protection features safeguard your system against overcharge, overdischarge, overload, short circuit, reverse polarity, and over-temperature.

Suitable for

• Off-grid solar power systems
• RV, boat, and caravan solar setups
• Remote monitoring stations
• Backup power systems

Key specifications

• Rated Charge Current: 60A
• System Voltage: 12V / 24V / 36V / 48V Auto-detection
• Max PV Input Voltage (VOC): 150V
• Max PV Input Power: 720W (12V), 1440W (24V), 2160W (36V), 2880W (48V)
• Battery Type Compatibility: Gel, Sealed, Flooded, Lithium (LiFePO4, Li-ion)
• MPPT Tracking Efficiency: >99.5%
• Conversion Efficiency: Up to 98%
• Self-consumption: <20mA
• Display: LCD
• Communication Interface: RS485
• Operating Temperature Range: -20°C to +55°C
• Protection: Overcharge, Overdischarge, Overload, Short Circuit, Reverse Polarity, Over-temperature
• Grounding: Common Negative
• Enclosure IP Rating: IP30

Recommendations

For optimal performance, ensure the total PV input power does not exceed the maximum ratings for your system voltage. Use appropriate wire gauge and fusing as per local electrical codes. This controller is not intended for grid-tied systems.