BambuLab PA6-GF Azul (72600) con bobina, 1kg

The BambuLab PA6-GF Blue is a high-performance Nylon 6 filament reinforced with glass fibers, offering exceptional strength, stiffness, and heat resistance. Ideal for demanding engineering applications, this 1kg spool delivers reliable and consistent prints with excellent layer adhesion.

Advantages

Glass fiber reinforcement provides superior mechanical properties compared to standard Nylon filaments. The material exhibits high tensile and flexural strength, excellent wear resistance, and good dimensional stability. It is compatible with the Bambu Lab AMS system for multi-material printing and comes on a plastic spool for easy handling.

Suitable for

• Functional prototypes and end-use parts requiring high strength and stiffness
• Automotive, aerospace, and industrial components
• Tools, jigs, and fixtures
• Wear-resistant parts such as gears and bearings

Key specifications

• Material: PA6-GF (Nylon 6 Glass Fiber)
• Filament Diameter: 1.75 mm
• Diameter Tolerance: ±0.03 mm
• Net Weight: 1 kg
• Color: Blue
• Recommended Nozzle Temperature: 280-300 °C
• Recommended Bed Temperature: 90-110 °C
• Recommended Print Speed: 30-150 mm/s
• Density: 1.25 g/cm³
• Tensile Strength (X/Y): 70 MPa
• Flexural Strength: 120 MPa
• Izod Impact Strength (Notched): 10 kJ/m²
• Heat Deflection Temperature (HDT @ 0.45 MPa): 150 °C
• AMS Compatibility: Yes
• Spool Type: Plastic Spool
• Drying Recommendation: 80°C for 8-12 hours before printing
• Recommended Build Plate: High-Temperature Plate, Engineering Plate, Textured PEI Plate

Recommendations

For best results, dry the filament thoroughly before use and print in a well-ventilated area. Use a hardened steel nozzle for abrasive glass fiber materials. Store in a dry environment to prevent moisture absorption.