Bomba de agua Einhell GC-DP 9035 N

The Einhell GC-DP 9035 N water pump is a garden pump built for moving large volumes of water efficiently. It features a 900 W motor and a stainless steel housing that provides corrosion resistance and mechanical stability for outdoor use. The pump delivers up to 18,000 litres per hour, can lift water to a maximum height of 9 metres and is rated for handling water temperatures up to 35 °C. Powered from a 220–240 V AC supply, the unit includes a 10 metre power cable and compact dimensions (179 mm width, 240 mm depth, 448 mm height) for flexible placement in garden and irrigation setups.

Advantages

The stainless steel body offers improved durability and reduced susceptibility to rust compared with painted or plastic housings. The 900 W motor provides a balance of power and energy use suitable for many garden applications, while the high flow rate supports rapid water transfer and filling tasks. The 10 m cable adds installation convenience and the pump’s ability to handle water up to 35 °C makes it suitable for typical outdoor water sources.

Suitable for

• Irrigation of lawns, flowerbeds and vegetable gardens
• Filling or emptying garden ponds, water tanks and rainwater barrels
• Water transfer between containers and short-distance drainage
• Connecting to sprinkler systems or hose-based garden watering

Key specifications

• Motor power: 900 W
• Maximum flow rate: 18,000 l/h
• Maximum delivery height: 9 m
• Maximum liquid temperature: 35 °C
• Supply voltage: 220–240 V AC
• Power cable length: 10 m
• Housing material: stainless steel
• Dimensions (W × D × H): 179 × 240 × 448 mm

How to use

Place the pump on a stable, level surface near the water source and ensure the inlet and outlet connections are compatible with your hoses or fittings. Connect the pump to the 220–240 V AC supply using the attached 10 m cable and check that any valves on the system are closed before starting. Prime the pump if required by your installation, open the outlet gradually, and switch the unit on. Monitor performance during the first minutes of operation and verify steady flow and absence of leaks. Turn the pump off and disconnect power before performing any maintenance.

Recommendations

Use the pump for clean or slightly cloudy water only; avoid pumping heavily contaminated or abrasive fluids. Regularly inspect hoses, seals and the stainless steel housing for signs of wear. For winter storage, drain the pump and store it in a frost-free environment. Follow local electrical safety regulations when connecting to mains power and consider a residual-current device (RCD) for added protection.