Bosch 2 608 667 394 Hoja de sierra de calar/calar de marquetería/sable Hoja de sierra de calar de acero al carbono (HCS) 3 uds.

Jigsaw blade Bosch 2 608 667 394 is a high carbon steel (HCS) blade designed for cutting thick construction timber and a variety of wood-based materials. The blade features a side set tooth geometry and ground teeth, a cutting length of 250 mm and a tooth spacing of 4 mm. The pack contains 3 blades suitable for use with compatible T-shank jigsaws.

Advantages

The HCS material offers good flexibility and resistance to breakage when cutting softwoods and wood-based panels. Side set, ground teeth provide efficient chip clearance and a clean cutting action in chipboards, fibreboards and wood core plywood. The 250 mm blade length and 4 mm tooth pitch balance cutting speed and edge durability for construction timber and thicker panels.

Suitable for

Key specifications

How to use

Fit the jigsaw blade into a compatible T-shank jigsaw according to the tool manufacturer's instructions, ensuring the blade is securely locked. Select appropriate speed and feed according to the workpiece: lower speeds for plywood and chipboard to reduce splintering, higher speeds for straight cuts in softwood. Apply steady pressure and let the blade perform the cut without forcing to prevent premature wear or tooth damage. Replace blades when cutting quality degrades or if the blade shows visible wear.

Recommendations

Use suitable personal protective equipment (eye and hearing protection, dust mask) and secure the workpiece before cutting. For best results on veneered or laminated panels, consider using masking tape along the cut line to reduce surface splintering.