Bosch 2608656263 hoja de sierra sable bimetal 5 uds.

S 628 DF — bimetal sabre saw blade from Bosch designed for cutting plasterboard and Fermacell© panels up to 100 mm thickness. The blade is manufactured with a side set and milled teeth for clean plunge cuts and tear-free edges, and comes in a pack of five 150 mm blades suitable for compatible sabre saws.

Advantages

The bimetal construction combines flexibility and wear resistance for a longer service life. Milled, side-set teeth and 4.3 mm tooth spacing provide efficient material removal and reduce tearing on gypsum-based boards. The 150 mm overall length is suitable for controlled plunge cuts and work in confined spaces.

Suitable for

• Cutting plasterboard (gypsum board)
• Cutting Fermacell© panels (thickness < 100 mm)
• Plunge cuts and detail cutting where tear-free edges are required

Key specifications

• Brand: Bosch
• Manufacturer part number (MPN): 2608656263
• EAN: 3165140235556
• Material: Bimetal
• Tooth spacing: 4.3 mm
• Overall length: 150 mm
• Pack quantity: 5 blades

How to use

Fit the blade into a compatible sabre saw according to the saw manufacturer's instructions and ensure it is secured before switching on. For plunge cuts, mark the cutting line, position the blade tip at the start point and apply steady pressure while keeping the saw vertical. Allow the blade to cut at its own pace to minimise chipping; avoid forcing the tool. Replace the blade when cutting performance decreases or teeth show visible wear.

Recommendations

Use appropriate personal protective equipment (safety glasses, gloves, dust mask) and secure the workpiece. Select a blade with correct length and tooth spacing for the material. Store blades dry and handle packs carefully to avoid bending the blades.