Bosch Wood hoja de sierra de calar con corte limpio por 2 caras acero al carbono (HCS) 5 uds.

The Bosch Wood 2-side clean jigsaw blades are made from high carbon steel (HCS) and are intended for cutting wood up to 50 mm thick. Each blade measures 117 mm in overall length and the pack contains five identical blades. The tooth geometry and HCS material deliver controlled cutting performance and a finish that is clean on both sides of the workpiece, suitable for precision woodworking and trim work.

Advantages

These jigsaw blades combine high carbon steel construction with a tooth design optimised for wood to provide reliable cutting performance and durability for general woodworking. The blades produce clean, low-tearout edges on both faces of the cut, reducing the need for secondary sanding or finishing. Their standard length and shank compatibility make them easy to install in most compatible jigsaw models.

Suitable for

• Crosscuts and rip cuts in softwood and hardwood up to 50 mm thick
• Precision joinery and trimming where both faces require a clean finish
• Cutting veneered panels, laminated boards and finished surfaces
• General-purpose wood cutting in renovation and DIY projects

Key specifications

• Blade material: high carbon steel (HCS)
• Intended material: wood and wood-based materials
• Maximum recommended cutting thickness: 50 mm
• Overall blade length: 117 mm
• Teeth: fine tooth geometry for clean cuts on both sides
• Pack quantity: 5 blades

How to use

Select a blade from the pack and fit it into a compatible jigsaw according to the tool manufacturer's instructions, ensuring the shank is fully seated and secured. Mark the cutting line on the workpiece and clamp it to prevent movement. Set the jigsaw speed and orbital action (if available) appropriate for the wood type, and guide the blade steadily along the marked line with moderate feed pressure. For the best two-sided finish, cut with the finished face either up or down depending on the jigsaw design and blade orientation, and avoid twisting the blade while cutting.

Recommendations

For optimal results, use these Bosch Wood 2-side clean blades on steady, well-supported workpieces and replace blades when performance degrades. Match blade speed and feed rate to the wood species: slower speed and steady feed for hardwoods, higher speed and moderate feed for softwoods. Wear appropriate eye and hearing protection and follow the jigsaw manufacturer's safety instructions.