Cuenta Contacto
Tu carrito
Envío con DPD y FedEx
¿Dudas? Pregunte a la IA

Broca Bosch SDS plus-9 RebarCutter

Broca Bosch SDS plus-9 RebarCutter
Broca Bosch SDS plus-9 RebarCutter
Broca Bosch SDS plus-9 RebarCutter
Broca Bosch SDS plus-9 RebarCutter
Broca Bosch SDS plus-9 RebarCutter
Broca Bosch SDS plus-9 RebarCutter
41,26 €
PDF
PDF
Stock 5 Código 2230119 Modelo 2 608 586 995 Garantía 3 años

Envíos y devoluciones

Entrega estimada viernes, 27 de noviembre
Te mantendremos informado a través de nuestro sistema de seguimiento detallado
Opciones de pago
Tarjeta bancariaVisaMastercardPayPalApple PayGoogle PayTransferencia bancaria

Haz una pregunta: el asistente IA responde al instante.

Descripción

The Bosch SDS plus-9 RebarCutter is a 300 mm drill bit engineered for cutting through rebar in reinforced concrete. It features firmly fixed carbide teeth, a 2+2 steep flute profile for efficient dust evacuation and vibration-optimised power transfer, and a ventilation hole that helps dissipate heat and remove metal chips. The bit is compatible with rotary hammers that accept SDS plus holders and is intended for use without impact.

Advantages

Firmly fixed carbide teeth and a uniquely shaped cutting geometry increase drilling speed and wear resistance. The steep 2+2 flute design promotes optimum dust removal and extends lifetime while also reducing vibration for better power transfer and consistent speed. A built-in ventilation hole reduces heat build-up and helps evacuate metal chips, supporting continuous operation. Compatibility with SDS plus rotary hammers ensures a secure fit.

Suitable for (tasks / use cases)

Key specifications

How to use

Install the SDS plus-9 RebarCutter into an SDS plus rotary hammer and set the tool to rotation-only (no impact). Align the bit with the intended drilling location and start at low speed to establish a stable entry, then increase speed as required. Maintain steady pressure without forcing the bit; allow the carbide teeth and flute design to remove material and chips. Periodically withdraw the bit to clear debris and check cutting progress. Do not cut through rebar unless you have explicit approval from a structural engineer.

Recommendations

Use appropriate personal protective equipment (eye and ear protection, gloves) and ensure the work area is secure. Follow the rotary hammer manufacturer's instructions for SDS plus accessories and do not operate the bit in hammer/impact mode. Obtain structural approval before cutting through load-bearing rebar.
Aspectos destacados
  • Drilling and cutting through rebar embedded in reinforced concrete
  • Creating through-holes in reinforced concrete where rebar is present
  • Construction and renovation jobs requiring rebar penetration
  • Professional use with SDS plus rotary hammers (non-impact mode)
  • Brand: Bosch
  • Model: SDS plus-9 RebarCutter
  • Length: 300 mm
  • Shank type: SDS plus
  • MPN: 2608586995
  • EAN: 3165140576680
  • Intended use: Cutting through rebar in reinforced concrete (use without impact)

Especificaciones

Especificaciones
Longitud
300 mm

Folleto

Abrir documento
Historial de precios de los últimos 6 meses
Broca Bosch SDS plus-9 RebarCutter
Actual
41,26 €
Mínimo 7 d
41,13 €
Máximo 7 d
52,63 €
Variación 24 h
-0,36 €   -1%
Variación 7 d
-11,37 €   -22%
Variación 30 d
-15,37 €   -27%

Escribir una opinión

Valoración *
Tu nombre se mostrará públicamente: puedes usar un apodo. Invitamos a los compradores a escribir opiniones; las revisamos antes de publicarlas y publicamos también las críticas.

Más productos BOSCH en esta categoría

12

Productos populares en esta categoría

3
Vendedor: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilna, Lituania · Código de empresa 303192950 · NIF-IVA UE LT100008198612 · Envío desde la UE (Lituania)
WhatsApp
Messenger
Hola, soy el asistente de IA de DistriNode. Puedo ayudarte a encontrar productos, comparar opciones, crear presupuestos en PDF o abrir solicitudes de soporte.
Todas las categorías