Broca percusora Bosch SDS Plus-5 6 mm

The Bosch Hammer drill bit SDS Plus-5 6mm is a single-piece masonry drill designed for accurate drilling in concrete and masonry when used with rotary hammers featuring SDS Plus holders. Manufactured in Germany and bearing the PGM Masonry Drill Bit Association test mark, it ensures tight tolerances, precise hole diameters and reliable fixing hold. A visible wear mark indicates whether the drilled hole diameter remains within tolerance for setting metal anchors.

Advantages

The centring tip provides guided starts to prevent wandering and jarring. AWB brazing and hardening technology reduces vibration and user strain while improving durability. The wear mark allows quick visual checks of hole diameter accuracy. Certified PGM quality confirms consistent manufacturing and performance.

Suitable for

• Drilling 6 mm holes in concrete
• Drilling in masonry and brick
• Setting metal anchors and fixings
• Use with SDS Plus rotary hammers

Key specifications

• Brand: Bosch
• Model: SDS Plus-5
• Diameter: 6 mm
• Shank type: SDS Plus
• Construction: single-piece masonry drill bit
• Certification: PGM Masonry Drill Bit Association test mark
• Country of manufacture: Germany
• MPN: 1618596166
• EAN: 3165140027748

How to use

Insert the Bosch SDS Plus-5 6mm drill bit into an SDS Plus rotary hammer and secure it according to the tool manufacturer’s instructions. Position the centring tip on the marked drilling point, start the hammer at low speed to establish the guide, then increase to the appropriate drilling speed and pressure for concrete or masonry. Periodically remove dust from the hole to maintain drilling efficiency and check the wear mark to ensure the hole diameter remains within tolerance for your chosen anchor type.

Recommendations

Use appropriate personal protective equipment (safety glasses, hearing protection and gloves). Match drill speed and feed pressure to material hardness; allow the bit to clear debris frequently and replace the bit when the wear mark indicates the diameter is out of tolerance.