Cable breakout BlueOptics MPO/UPC a 4x Duplex LC/UPC 1 m Multimodo OM4 G50/125 µm LSZH Magenta, 8 hilos, MPO sin pines

BlueOptics MPO/UPC to 4x Duplex LC/UPC 1m Multimode OM4 G50/125µm LSZH magenta breakout cable is a factory-terminated fiber breakout used for short-distance multi-fiber interconnects. This 1-meter cable features an 8-core MPO/UPC connector (without pins) on one end and four duplex LC/UPC connectors on the other, built on multimode OM4 G50/125µm fiber with a 3.0 mm LSZH magenta jacket. The assembly includes a factory test report and is intended for use in high-density parallel fiber links, MPO cassette connections and data center trunking where compact, reliable multimode connections are required.

Advantages

The cable provides a compact solution for converting MPO-based multi-fiber interfaces to standard duplex LC connections, enabling easy integration with existing duplex equipment. Using OM4 multimode fiber ensures improved modal bandwidth and optimized performance for short-reach parallel applications. The LSZH jacket reduces smoke and toxic gas emissions in the event of a fire, making the cable suitable for indoor installations in data centers and telecommunications rooms. Supplied with a factory test report, the cable offers documented optical performance and quality assurance.

Suitable for

Key specifications

How to use

Connect the MPO/UPC end to an MPO cassette, trunk module or equipment MPO adapter and plug the four duplex LC/UPC connectors into the corresponding LC ports on switches, transceivers or patch panels. Ensure correct fiber polarity and mapping between MPO fiber positions and duplex LC pairs before insertion. Handle connectors by the housings and avoid touching ferrules; keep protective dust caps on connectors until ready to connect. Follow standard fiber optic cleanliness procedures and verify connections using the supplied factory test report or by performing an insertion loss test if required.

Recommendations

Store and route the cable without sharp bends; maintain the minimum bend radius recommended for multimode fiber. Use MPO connectors without pins only where mating MPO adapters or cassettes accept pin-less MPO plugs. Inspect and clean all connector end faces before mating, and keep the factory test report for reference during installation and troubleshooting.