Cable Cisco C5 Negro 2 m

The Cisco C5 Black 2 m power cable provides a reliable connection between devices and mains power. Designed with a European CEE 7/7 plug on one end and a C5 connector on the other, this 2-meter cable supports an input voltage of 230 V and a current rating of 16 A. The cable is black and intended for use with Cisco equipment and other devices that accept a C5 inlet.

Advantages

The cable's 2 m length offers flexible placement of equipment while maintaining a secure power connection. Its 16 A current rating and compatibility with 230 V mains make it suitable for standard European power systems. The black finish provides a discreet appearance that blends with most networking and office setups.

Suitable for

• Connecting Cisco laptops, small network devices or power adapters with a C5 inlet
• Office workstations and server racks where a 2 m reach is sufficient
• Replacement or spare power lead for compatible equipment

Key specifications

• Connector A: European plug CEE 7/7
• Connector B: IEC C5
• Cable length: 2 m
• Rated voltage: 230 V
• Rated current: 16 A
• Colour: Black
• Brand: Cisco
• MPN: CAB-AC-C5-EUR=
• EAN: 0882658120138

How to use

Insert the CEE 7/7 plug into a suitable 230 V mains outlet. Connect the IEC C5 end to the device's C5 inlet until it seats firmly. Ensure the cable is routed to avoid sharp bends and that it does not create a trip hazard. Disconnect power by removing the plug from the mains before performing maintenance on connected equipment.

Recommendations

Use this cable in indoor environments and keep it away from liquids and excessive heat. Inspect the cable periodically for damage; do not use if the insulation or connectors are compromised. Replace the cable with the same specification if a higher current or different connector is required.