Cable coaxial DisplayPort DELOCK 16K 60 Hz 80 Gbit/s funda trenzada 1 m, DisplayPort a DisplayPort, negro

This coaxial DisplayPort cable by DELOCK connects devices with a DisplayPort interface, such as monitors, projectors or televisions, to a PC or laptop. The cable has a 1 m length, braided outer coating for improved durability and DisplayPort connectors on both ends. It supports high-bandwidth video and multichannel audio transmission for compatible graphics cards and displays.

Advantages

The cable supports a maximum bandwidth of 80 Gbps, enabling video up to 16K at 60 Hz, up to 8K at 120 Hz and up to 4K at 240 Hz. HDR10 support ensures more accurate colour reproduction with improved depth, brightness and contrast. A triple-shielded coaxial design and high-quality construction reduce interference and improve audio transmission quality, supporting sampling rates up to 1536 kHz.

Suitable for

• High-resolution gaming and multimedia setups
• Connecting PCs or laptops to monitors, projectors or TVs with DisplayPort inputs
• Workstations and content-creation systems requiring high bandwidth
• Setups needing multichannel high-resolution audio alongside video

When it may not be suitable

This cable requires DisplayPort-compatible source and display devices to achieve the stated resolutions and refresh rates; it will not upgrade legacy ports. If your devices only use HDMI, USB-C Alt Mode, or older DisplayPort versions without support for the same bandwidth or DSC, you will not reach the highest specs. For longer distances than 1 m, signal integrity and supported performance may differ.

Key specifications

• Length: 1 m
• Connector type: DisplayPort to DisplayPort (straight male both ends)
• DisplayPort version: 2.1
• Maximum bandwidth: 80 Gbps
• Maximum resolution/refresh: up to 15360 x 8640 pixels (16K) at 60 Hz; up to 8K at 120 Hz; up to 4K at 240 Hz
• HDR support: HDR10
• Audio sampling rate: up to 1536 kHz
• Cable design: coaxial, triple-shielded with braided outer coating
• Colour: Black

How to use

Connect one DisplayPort plug to the graphics card or output device and the other plug to the DisplayPort input on the monitor, projector or TV. Ensure both devices support the desired DisplayPort 2.1 features and configure resolution and refresh rate in the operating system or GPU control panel. For best results, use appropriate display drivers and enable HDR or DSC in device settings where available.

What to consider before purchase

• Ensure both source and display support DisplayPort 2.1 or the required features (DSC, HDR10) to achieve target resolutions and refresh rates.
• Confirm 1 m cable length is sufficient for your setup; longer runs may require active cables or signal extenders.
• Check connector compatibility with your devices (DisplayPort straight male on both ends).
• Verify that your GPU and monitor firmware/drivers are up to date to use full bandwidth and features.

Recommendations

For gaming or professional workflows that demand high frame rates and colour fidelity, pair this DELOCK coaxial DisplayPort cable with DisplayPort 2.1-capable graphics cards and monitors, keep cable runs short (1 m) to maintain signal integrity, and enable DSC/HDR10 in device settings when supported.