Cable coaxial Microconnect BNC-HDSDI-5M BNC RG-6 5m negro

MicroConnect 12G SDI coaxial cable (RG-6) with BNC connectors on both ends provides a professional 75 Ω connection for reliable video transmission. The 5 m cable supports 12G-SDI, 6G-SDI, 3G-SDI and HD-SDI signals, enabling up to 4K at 60 Hz (resolutions up to 4096×2160) and Full HD 1080p. The cable is lightweight (0.15 kg), finished in black and produced to comply with CE, REACH and RoHS standards.

Advantages

The MicroConnect BNC-HDSDI-5M offers high signal integrity for SDI workflows thanks to its RG-6 construction and 75 Ω impedance. Dual BNC connectors ensure secure, professional connections while the 5 m length balances reach and manageability. The product includes a long manufacturer warranty and is manufactured in Denmark.

Suitable for

• Professional broadcast and video production equipment
• Live event video feeds and switchers
• Studio camera connections and signal routing
• Post-production monitoring and playback systems

Key specifications

• Cable type: RG-6
• Length: 5 m
• Connectors: BNC to BNC
• Impedance: 75 Ω
• Supported standards: 12G-SDI / 6G-SDI / 3G-SDI / HD-SDI
• Maximum resolution: up to 4K60 (4096×2160) and Full HD 1080p
• Weight: 0.15 kg
• Colour: Black
• Manufacturer: MicroConnect (made in Denmark)

How to use

Connect one BNC connector to the SDI output of your source device and the other BNC connector to the SDI input of the receiving device. Ensure connectors are fully seated and locked for a stable 75 Ω connection. Route the cable to avoid sharp bends and sources of electromagnetic interference to maintain signal quality, especially when transmitting high-bandwidth 12G-SDI signals.

Recommendations

For best results with 4K60 (12G-SDI) signals, keep cable runs as short as practical and avoid running parallel to high-voltage power cables. Verify connector seating before critical live events and consider using additional shielding or signal amplifiers only if signal degradation is observed over longer distances.