Cable de alimentación ACT CEE 7/7 conector macho (acodado) - C15 (acodado a la derecha) IEC60320 negro 1,5 m

The ACT Powercord CEE 7/7 male angled to C15 IEC60320 is a 1.5 m mains cable designed for equipment that requires up to 250 V and 10 A. It features an angled CEE 7/7 plug and an angled IEC C15 connector that is high-temperature resistant up to 120°C. The H05RN-F 0.75 mm² black cable provides flexibility and durability for use with servers, network switches and other IT equipment.

Advantages

The angled CEE 7/7 and angled IEC C15 connectors allow for space-saving installations and safer cable routing in rack and server environments. The IEC C15 connector is specified for higher temperature tolerance (up to 120°C), making it suitable where elevated temperatures may occur at the equipment inlet. The H05RN-F 0.75 mm² construction balances flexibility and mechanical robustness for typical IT and networking applications.

Suitable for

• Servers and data centre equipment
• Network switches (for example HP and Cisco)
• IT racks and densely packed installations where angled plugs are required

Key specifications

• Cable length: 1.5 m
• Connectors: CEE 7/7 angled (male) to IEC60320 C15 angled (male)
• Temperature rating C15 connector: up to 120°C
• Maximum load: 250 V ~ / 10 A
• Cable type: H05RN-F, 0.75 mm²
• Colour: black
• Quantity: 1 pc

How to use

Connect the angled CEE 7/7 plug to a compatible mains socket and the IEC C15 connector to the equipment inlet. Ensure the connectors are fully inserted and that the cable is routed to avoid sharp bends and mechanical strain. Verify that the device power rating does not exceed 250 V and 10 A before use.

Recommendations

Use the cable only with compatible inlet types and within the specified electrical and temperature ratings. Avoid using the cable in permanently wet locations and inspect regularly for signs of wear or damage; replace if insulation or connectors are compromised.