Cable de alimentación Bachmann 354.127 negro 2 m conector hembra C13

The Bachmann 354.127 Black 2 m C13 coupler power cable is a 2-metre mains lead designed for reliable connection of compatible IT and consumer electronics equipment. The cable features a standard IEC C13 coupler and a moulded connector set in a black jacket. It is intended to provide a steady mains connection with good conductivity and mechanical durability for everyday use in home and office environments.

Advantages

This power cable offers a compact, flexible design that facilitates easy routing behind desks and equipment racks while maintaining electrical safety. The insulated conductors and moulded C13 connector ensure a snug fit with compatible sockets and reduce the risk of accidental disconnection. The black outer sheath resists dirt and blends with most equipment, and the 2-metre length provides additional reach compared with shorter leads.

Suitable for

• Desktop computers and monitors with C14 inlet
• Printers, scanners and peripherals requiring a C13 connection
• Powering UPS units and power strips with matching IEC inlet
• Office and home electronic devices where a 2 m lead is needed

Key specifications

• Length: 2 metres
• Connector type: IEC C13 coupler
• Colour: Black
• Conductor: Insulated copper conductors (standard mains cable construction)
• Sheath: Durable PVC outer jacket
• Intended use: AC mains power connection for compatible equipment

How to use

Connect the C13 coupler to the corresponding C14 inlet on your device until it seats firmly. Plug the opposite mains plug into a properly rated wall outlet or power distribution unit. Ensure that the cable is routed without sharp bends, pinch points or exposure to heat sources. Before use, inspect the cable for visible damage; do not use if insulation or connectors are compromised. Disconnect by pulling the connector body rather than the cable to avoid strain.

Recommendations

Use this cable with devices that accept an IEC C13 connection and within the rated mains voltage and current of your local electrical system. For installations near water or in high-humidity areas, ensure appropriate environmental protection and compliance with local safety regulations. Replace the cable if any signs of wear, overheating or connector damage appear.