Cable de alimentación con funda CableMod C-Series Pro ModMesh 16‑Pin a 4×8‑Pin para fuentes de alimentación Corsair Type 4 y 3, 60 cm, negro

The CableMod C-Series Pro ModMesh 16‑Pin to 4×8‑Pin sleeved power cable is a purpose-built harness for Corsair Type 4 and Type 3 PSUs. At 60 cm length and finished in black sleeving, this cable converts a single 16‑pin (12V‑2x6) GPU power output into four separate 8‑pin connectors, enabling neat PSU-to-GPU routing in multi‑GPU or high-power graphics configurations while preserving connector compatibility with the specified Corsair models.

Advantages

This sleeved cable offers organized power distribution for demanding GPU setups, reducing clutter and improving airflow inside the case. The ModMesh sleeving provides a durable, flexible outer layer that resists fraying while maintaining a clean visual appearance. The fixed 60 cm length is suitable for standard layout cases and allows straightforward routing without excessive slack. Connectors are shaped to match the electrical and mechanical fit required by Corsair Type 4 and Type 3 power supplies, ensuring secure connections and reliable power delivery.

Suitable for

• Systems using Corsair Type 4 or Type 3 modular power supplies that require splitting a 16‑pin GPU output into multiple 8‑pin connectors
• High-power single GPU or multi‑GPU builds where multiple 8‑pin GPU inputs are needed
• PC builds that prioritize tidy cable management and improved internal airflow

Key specifications

• Cable configuration: 16‑pin (12V‑2x6) to 4 × 8‑pin (female) GPU connectors
• Length: 60 cm
• Sleeving: black ModMesh sleeved outer layer
• Compatibility: designed for Corsair Type 4 and Type 3 modular power supplies
• Connector finish: black housings to match dark-themed builds

How to use

Power down the system and disconnect the PSU from mains before installing the cable. Insert the 16‑pin end into the corresponding modular output on the Corsair Type 4 or Type 3 power supply until it seats firmly. Route the four 8‑pin connectors to the graphics card(s) following the case’s cable management channels, and plug each 8‑pin connector into the GPU power sockets, ensuring correct orientation and full insertion. After connections are secured, verify that no pins are bent or exposed and that cables do not obstruct fans or moving parts, then reconnect mains power and power on the system.

Recommendations

Use this cable only with compatible Corsair Type 4 or Type 3 modular PSUs and GPUs that accept 8‑pin power connectors. For multi‑GPU or high-power cards, ensure the PSU has sufficient total wattage and that individual connector current limits are observed. Route cables to avoid tight bends and maintain airflow; secure excess length with cable ties or straps to prevent contact with heatsinks or fans.