Cable de alimentación InLine, conector Euro / conector Euro8, negro, 1,5 m

Wide compatibility for many applications:The power cord is suitable for numerous devices with a Euro 8 connection and is versatile in use.
Reliable power supply:The wire cross-section of 0.75 mm² ensures a stable power supply within the specified power values.
Standard-compliant plug quality:The Euro plug (CEE 7/16) and the IEC C7 device plug comply with current European standards.
Suitable for indoor use:The workmanship is designed for use in dry indoor areas.
Various lengths for flexible use:Available in different cable lengths for optimal adaptation to any environment.

The InLine power cable with Euro plug (CEE 7/16) to Euro 8 plug (IEC-C7) provides a safe and flexible power supply for a wide range of electrical devices with a Euro 8 connection. Whether for AV technology, power supplies, or household appliances, the cable is versatile for both professional and private use.
With a wire cross-section of 0.75 mm², the cable is suitable for a maximum power of 625 W at 250 V and 2.5 A. The robust plugs comply with European standards and ensure a reliable connection. Thanks to its various length options, the cable can be flexibly adapted to the respective environment.
It is suitable for indoor use and is the right choice for both professional installations and end users when quality and reliability are required.

Power plug: CEE 7/16, 2-pin (Euro plug)
Device plug: IEC-C7 / Euro 8 ("Figure-8")
Wire cross-section: 0.75 mm²
Rated voltage: 250 V AC
Rated current: 2.5 A
Maximum power: 625 W
Area of application: Indoor

How to use

Ensure the power is switched off at the mains before connecting. Insert the Euro (mains) plug into the wall outlet and the Euro8 connector into the device inlet until fully seated. Check that connections are secure before switching power on. Disconnect by switching off power and pulling the plugs straight out by the connector body, not the cable.

Recommendations

Use this cable only with compatible devices and rated power sources. Avoid sharp bends, excessive pulling or exposure to liquids. Inspect connectors regularly for damage and replace the cable if any wear or faults are detected.