Cable de altavoz Omnitronic 2 x 2,5 mm², 5 m, negro

Omnitronic speaker cable with two conductors of 2.5 mm² cross-section and a length of 5 m in black. Designed for connecting loudspeakers to amplifiers and PA equipment, this cable provides adequate current capacity for medium-power audio systems. Flexible insulation and a straightforward two-core design make it suitable for stage, studio, and home installations where reliable signal transfer and ease of routing are required.

Advantages

The two 2.5 mm² conductors offer a balance between conductivity and flexibility, reducing power loss across short to medium runs. The cable's insulation is flexible to simplify installation in confined spaces and behind racks or speaker stands. Its two-core configuration allows easy polarity identification and straightforward connection to most speaker and amplifier terminals. The black outer jacket provides a neutral aesthetic and some resistance to abrasion in typical installation environments.

Suitable for

Key specifications

How to use

Strip an appropriate length of outer insulation to expose the two conductors, observing proper polarity marking to maintain correct speaker phase. Insert the conductor ends into the amplifier and speaker terminals or use compatible connectors/crimps as required by your equipment. Avoid leaving bare conductor exposed; ensure solid mechanical connections and strain relief to prevent accidental disconnection or damage. For best results, route the cable away from power lines and sources of electromagnetic interference.

Recommendations

Use this 2 x 2.5 mm² cable for runs up to a few metres in medium-power systems; for longer distances or higher power applications consider cables with larger conductor cross-sections. Inspect connections regularly and replace the cable if insulation shows significant wear.