Cable de audio RCA (cinch) Omnitronic 2x2, 10 m, modelo 30209380

The Omnitronic cinch (RCA) audio cable 2x2, 10 m (model 30209380) is a passive analog interconnect designed for unbalanced stereo connections. It provides two paired conductor lines for left and right channels, allowing reliable signal transmission between audio components such as mixers, amplifiers, CD players and studio or stage monitors. With a length of 10 metres, the cable supports flexible placement of equipment while maintaining a straightforward analog path for line-level signals in home, project or professional audio setups.

Advantages

This Omnitronic audio cinch cable combines a standard RCA connector format with a 2x2 conductor layout and a 10 m length to enable long-reach analog connections without additional electronics. It is intended to keep signal routing simple and compatible with a wide range of consumer and professional audio devices. The cable construction aims to reduce handling noise and maintain consistent left/right channel separation over its length.

Suitable for

Key specifications

How to use

Connect the red and white (or red and black) RCA plugs to the corresponding right and left line outputs on the source device, and plug the opposite ends into the matching inputs on the receiving device. Ensure firm seating of connectors to avoid intermittent contact. Route the cable to avoid sharp bends and keep it clear of mains power cables where possible to reduce potential interference. For best results, verify channel orientation and perform a sound check at low volume before normal operation.

Recommendations

Use this 10 m Omnitronic RCA cable for unbalanced line-level connections in environments where balanced wiring is not available or required. Where long runs and high interference are a concern, consider using shorter runs or balanced alternatives to minimize noise pickup.