Cable de audio XLR de 3 polos 2 x XLR de 3 polos Negro Omnitronic 30225203

The Omnitronic Audio Cable XLR 3-pin 2 x XLR 3-pin Black (model 30225203) is a compact 0.5 m audio connection cable with one female XLR 3-pin connector and two male XLR 3-pin connectors. Designed for professional and semi-professional audio environments, this black, short-length cable provides balanced signal transfer and stable mechanical connections for microphones, preamps and mixing consoles. The cable construction focuses on reliable contact and low noise transmission to support clear audio paths in stage, studio and live-sound setups.

Advantages

The cable’s short 0.5 m length reduces signal loss and limits cable clutter near consoles and stage gear while preserving signal integrity through balanced XLR connections. Durable metal connector shells and secure locking mechanisms ensure stable mechanical fit and consistent contact. The black outer jacket provides a discreet, professional appearance and basic protection against wear in regular use.

Suitable for

Key specifications

How to use

Connect the female XLR end to the output device (for example a microphone cable or a stage box) and plug the two male XLR connectors into the inputs of the mixer, preamp or other target devices. Ensure connectors are fully seated until the locking latch engages to prevent accidental disconnection. Use the short length to keep routing tidy and avoid unnecessary loops; when placing multiple cables, allow slight separation to reduce mechanical strain at connector ends.

Recommendations

For reliable long-term performance, avoid tight bending near the connector strain relief, route the cable away from power cables to minimize interference, and inspect connectors periodically for dirt or loose contacts. Use this cable for balanced, low-impedance microphone-level signals and avoid using it for mains or non-audio power connections.