Cable de carga para vehículos eléctricos Qoltec 52474 Type 2 22 kW 5 m

Electric Vehicle Charging Cable Qoltec 52474 Type 2 22 kW 5 m is a 5‑metre charging cable with Type 2 connectors on both ends designed for charging electric cars across Europe. It supports three‑phase charging up to 22 kW (400 V, 32 A) and weighs approximately 2.1 kg, combining sufficient power capacity with manageable portability for trunk storage or the supplied bag.

Advantages

The Type 2 connector follows the European standard and is compatible with most electric cars sold in Europe. The cable is tested to meet required safety standards, is resistant to fire and extreme weather conditions (operational temperature range -30 °C to +50 °C), and features a durable, flexible outer sheath with water and dust resistance. The ergonomic plug and 5 m length provide comfortable handling and convenient reach to charging points.

Suitable for

Key specifications

How to use

Before use, ensure both the vehicle inlet and the charging station are in good condition and powered off if required by the station. Uncoil the cable and connect one Type 2 plug to the vehicle inlet and the other Type 2 plug to the charging station socket following the station’s instructions; the cable supports communication between car and station through the connector contacts. After charging completes, stop the session using the station or vehicle interface, then disconnect the plugs, coil the cable, and store it in the trunk or supplied bag. Follow local charging station rules and the vehicle manufacturer’s instructions during each use.

Recommendations

Use the cable with charging points and vehicles that support Type 2 connections and the stated electrical parameters. Avoid sharp bends, heavy impacts, and exposure to prolonged sunlight or chemicals. Inspect plugs and cable for damage before each use; replace the cable if any defect is found. For outdoor charging, ensure connectors are dry before connection.